Just ordered these.

[BWG56]

I believe us southerners are rubbing off on ya. Rid is past tense for Ride down here. "I rid that sumbitch in the ground"

Is that like being blin also

 

[cdogg556]

Tracking Number: 9405511699000299814299




In-Transit
Expected Delivery by: Saturday, October 14, 2017 by 8:00pm

Product & Tracking Information

Ohhhhhhhh Yeaaaaaaaaa! Damn! It's been like fuk'n Christmas for me around here lately!
Let's see...... Ok, I just rebuilt my forks, installed a new updated pressure plate, spring, and throwout bearing, also a new primary chain adjuster pad, new clutch cable, billet primary inspection cover, new 90 degree fuel inlet, and now the new running light/turn signals! Next on deck, a new Shinko rear tire and I am gonna get a new belt and keep my old one for a spare. Oh and a soon a new speedo, just not sure on what to get yet, would prefer a stock one (used) for cheap, hehe!

 

[Th3InfamousI]

Tracking Number: 9405511699000299814299




In-Transit
Expected Delivery by: Saturday, October 14, 2017 by 8:00pm

Product & Tracking Information

Ohhhhhhhh Yeaaaaaaaaa! Damn! It's been like fuk'n Christmas for me around here lately!
Let's see...... Ok, I just rebuilt my forks, installed a new updated pressure plate, spring, and throwout bearing, also a new primary chain adjuster pad, new clutch cable, new 90 degree fuel inlet, and now the new running light/turn signals! Next on deck, a new Shinko rear tire and I am gonna get a new belt and keep my old one for a spare. Oh and a soon a new speedo, just not sure on what to get yet, would prefer a stock one (used) for cheap, hehe!

Thanks for the tracking....just diverted those to my house! Looks like I'm getting new LED!

You do Man cDoggy! Whoop!

Sent from my 2PS64 using Tapatalk

 

[cdogg556]

Thanks for the tracking....just diverted those to my house! Looks like I'm getting new LED!

You do Man cDoggy! Whoop!

Sent from my 2PS64 using Tapatalk

No problem! Anytime!

 

[cdogg556]

Finally got time to install the lights! Whooohoooo! Love em!

 

[pauldeepsea]

Been wanting something to help be seen at night since I frequently ride at night home from my meetings, anyway Ker has had these and I really liked them so I finally pulled the trigger and ordered them!
https://www.customdynamics.com/front-bullet-style-dynamic-ringz-led-inserts-for-chopper

Like those, may actually look into those as well


Sent from my iPhone using Tapatalk

 

[cdogg556]

That's almost as brite as the new Road Glides.

 

[BWG56]

That's almost as brite as the new Road Glides.

Prolly blin someone

 

[BWG56]

Do these come with jst connectors?

no, Maybe he took a pic of what he did to make it work, mine were plug n play but I got them awhile ago

 

[cdogg556]

Nope, had to do it myself, the bad part is that the connector in the housing is not a "JST" connector and needed to be changed also.

 

[cdogg556]

no, Maybe he took a pic of what he did to make it work, mine were plug n play but I got them awhile ago

You got lucky! Wish you could find out where you got yours from!

 

[BWG56]

You got lucky! Wish you could find out where you got yours from!

Did you plug the pins in directly?
I'll look for my paperwork when I get home

 

[cdogg556]

Did you plug the pins in directly?
I'll look for my paperwork when I get home

Yea I did, I actually put shrink tubing over each one and inserted them separately and then put shrink tubing over the whole thing, I'll get some pics of it later, I was too tired last night, I didn't wanna change the original connector so I could put the stock lights back in if I needed to.

 

[cdogg556]

Lowes sell those big wire nut connectors.

Great info Paul! I totally didn't even think of that! This is what I love about this forum, the info and knowledge you get here is priceless! Thanks Paul!

 

[pauldeepsea]

Yea I did, I actually put shrink tubing over each one and inserted them separately and then put shrink tubing over the whole thing, I'll get some pics of it later, I was too tired last night, I didn't wanna change the original connector so I could put the stock lights back in if I needed to.

Good place to order jst connectors from and the pins if you need them. I have used these guys several times. They are located in San Diego
https://www.prowireusa.com


Sent from my iPhone using Tapatalk

 

[BWG56]

Lowes sell those big wire nut connectors.

 

[cdogg556]

Good place to order jst connectors from and the pins if you need them. I have used these guys several times. They are located in San Diego
https://www.prowireusa.com


Sent from my iPhone using Tapatalk

Thanks Paul, I actually got em from Curtis, good to have other sources though!

 

[cdogg556]

View attachment 50108

Dat's sum funnay shit der!

 

[cdogg556]

Yea I did, I actually put shrink tubing over each one and inserted them separately and then put shrink tubing over the whole thing, I'll get some pics of it later, I was too tired last night, I didn't wanna change the original connector so I could put the stock lights back in if I needed to.

Here's the pics I said I would post of how I connected my running light/turn signals.....In this pic you can see I have added the jst connectors to my lights, each is individually covered in shrink tubing then in one bigger tube.
This is the stock BDM connector, don't have any idea what it's called, but this is it.
Slide the 1/2" shrink tubing over the jst connectors first.
Then plug them in. Now slide the tubing over the connection, be sure to check that the lights are working correctly before you shrink the tubing.

Now get you heat gun and shrink the tube, this is the finished product, now push it in the housing and your done!
Took the bike out this evening with the new lights and loved them, I highly recommend these!

 

[BWG56]

I need to do this on my K9. Maybe right after I pour the apron on the barn..

I don't think you need the apron after all these years without it