Starter
- Thread starter bfitz
- Start date
Hirter6Pack
Not Quite A Guru
Try
Dead one customs
ChoppaNoob
Active Member
There was a Andrew (I believe was his name) that did them and trannys too...
I'd be willing to do it if you need shoot me a message.
Sent from my 2PS64 using Tapatalk
Sent from my 2PS64 using Tapatalk
texas big dog
Member
Text me if you can rebuild 2004 BDM starters. I have two that need rebuilding. Thanks! (512) 947-2252 Wayne
RED & WHITE 81
New Member
TERRY COMPONENTS ( TERRYCOMP.Com) for all Billet Starters with an up to maximum 3 h.p. All T6T Billet Starters that come with a remarkable warranty and amazing reputation . Ask for Mike .Tech@Terrycomp.com
BadDawg Bill
Well-Known Member
Google starter repair in your area. A local shop can rebuilt it with no problems. I take mine to a local shop and the last one cost me $44 to rebuild. They are an auto shop but a starter is a starter... You cut the armature and replace the brushes....
Starter shop around the corner told me they would have no issues with rebuilding mine, 60 bucks, but that's Canadian..so about 2 bucks US..
At that price I bet it only includes new contacts and plunger thats it.Starter shop around the corner told me they would have no issues with rebuilding mine, 60 bucks, but that's Canadian..so about 2 bucks US..
If any other parts are worn it will cost ya more. New set of brushes is $20 or so, ,and good luck to them finding the right clutch of that goes bad. The one in our dogs has a non standard bushing, and we also have an oil seal pressed into the end of the clutch assembly. You don't see those on Harley's.
There's a seal on the inside of the nose cone that needs to be replaced and you gotta take the clutch out of the housing pulling out the drive clutch is a fun pain in the arse.
Sent from my 2PS64 using Tapatalk
Last edited:
chopperowner2478
Member
I did mine at Shorty's in Tulsa for $42.00 and he told me NEVER POWER WASH that area where the rubber cable boots for the starter that's what caused my bearing to wear out but learning to to small overhaul at home also.. been in biz 30+ years