Lifters an 585 cam

[Bdawg12]

So I have a 08 k9 it has 19,500 miles on it s&s recommends to change the lifters. While I'm there going to do the cam as well is there anything else I should do while doin this upgrade? Also where is the best place for these parts does it come as a kit or not? I looked on s&s website didn't see either one of them there. Thanks in advance for the help.

 

[Th3InfamousI]

Www.wildsteedworx.com
Has all the stuff you need.

If your going to replace the lifters you'll need to either take your rockers off or go with quickee pushrods and cut your old one out. I recommend getting the quickees and cutting them out then you'll always be able to do lifters without touching your rockers. Saves lots of time and money.

Get new tappet gaskets and Cam cover gasket too. Curtis has everything you need.

Personally I don't recommend the limited travel kit lifters more expensive and more time consuming to adjust for not any benefit on a mild stock motor but shoot Curtis an email and he can probably get the lifters without them.

He has everything you need at a great price



Sent from my 2PS64 using Tapatalk

 

[Trainguy]

I have an 08 an went to the 585. It's a nice upgrade from the 546 ( I think ) that is in there.

 

[BWG56]

I have an 08 an went to the 585. It's a nice upgrade from the 546 ( I think ) that is in there.

Your correct

 

[Bdawg12]

Thanks for your advice I surely appreciate it an i will check that website out.

Sent from my SM-G920V using Tapatalk

 

[BWG56]

So I have a 08 k9 it has 19,500 miles on it s&s recommends to change the lifters. While I'm there going to do the cam as well is there anything else I should do while doin this upgrade? Also where is the best place for these parts does it come as a kit or not? I looked on s&s website didn't see either one of them there. Thanks in advance for the help.

I personally would go directly to S&S and get the parts from them.

 

[cdogg556]

I personally would go directly to S&S and get the parts from them.

Hey Ker, did you know that nobody comes here anymore due to all your gay postings? What are you doing helping another member? That's just not your M.O. from what I read, supposedly you only high jack threads with all your homophobic bullshit!

 

[BWG56]

Hey Ker, did you know that nobody comes here anymore due to all your gay postings? What are you doing helping another member? That's just not your M.O. from what I read, supposedly you only high jack threads with all your homophobic bullshit!

Opps, I slipped up again

 

[cdogg556]

Opps, I slipped up again

Baaaad Dog!

 

[cdogg556]

 

[bdm7250]

From a 585 cam to a golden turd..I would say that's a success..

 

[BWG56]

Very fitting award for ker

Its a lot better than that brown thing you posted

 

[BWG56]

OMG, your way over the top

 

[bdm7250]

Whatever ya piece of

View attachment 40564

You haven't been eating your veggies..

 

[cdogg556]

 

[bdm7250]

View attachment 40572

Bring it to life John..

 

[bdm7250]

 

[Bdawg12]

Update!!! got parts just waiting for the guy to finish a bike he's working on currently. So ready to get it done got the parts from s&s
Saved a few bucks. Thanks again for the advice

Sent from my SM-G920V using Tapatalk

 

[bdm7250]

 

[ground pounder]

Make sure you put a new cam bearing in when you upgrade to the 585 cam!!!