try start the bike nothing happens

Guillaume

Active Member
Yesterday on the road change out my stator + VR ,Bike start up went for a ride ,Have a cold one , try to start the bike nothing happens check battery was full , Clean this morning my starter inside put every thing back so as it came out
Check my ground on the battery is clean and tide ,try to start the bike only my flashing light come on , no power at all, Maybe any idea ,get a bit frustrating with that bike .
Guillaume
 

IRONHEAD

Active Member
Sounds like a weak battery. I once had all kinds of starting problems that went away with a new fully charged battery.
 

BWG56

Guru
Yesterday on the road change out my stator + VR ,Bike start up went for a ride ,Have a cold one , try to start the bike nothing happens check battery was full , Clean this morning my starter inside put every thing back so as it came out
Check my ground on the battery is clean and tide ,try to start the bike only my flashing light come on , no power at all, Maybe any idea ,get a bit frustrating with that bike .
Guillaume
Go back to one of your other 3 or 4 post's on this, It has been said before to have your EHC tested when you said nothing lights up on it, and that was before you threw the stator and rotor at it.:oldbang:
 

Guillaume

Active Member
That is correct and than after 15 min the bike turn on , The same happens now the bike turn on ,have no idea really , now the battery was full , but anyway put the charger on , Check my circle breaker and both pins have continuity
now check the new VR with a pin lamp and both pins the light came on , maybe have the change the VR out .
 

bdm7250

Guru
Supporting Member
Go back to one of your other 3 or 4 post's on this, It has been said before to have your EHC tested when you said nothing lights up on it, and that was before you threw the stator and rotor at it.:oldbang:
That is correct and than after 15 min the bike turn on , The same happens now the bike turn on ,have no idea really , now the battery was full , but anyway put the charger on , Check my circle breaker and both pins have continuity
now check the new VR with a pin lamp and both pins the light came on , maybe have the change the VR out .
IMG_5641.GIF Wholly shit man, get your EHC tested by slick117.
 
Top