kick start?

Energy One

BWG56

Guru
You have a few problems. As far as I know no one makes a kick for a RSD. Even if they did you would have to retard the timing so it wouldn't kick back and with the computer and electronic ign this would be hard to do. You would need the compression releases to work without the start button and go off when the bike started.... Just weld a kick arm onto your tranny and look cool....
:oldlaugh::oldlaugh:
 

Matheny 514

Active Member
You have a few problems. As far as I know no one makes a kick for a RSD. Even if they did you would have to retard the timing so it wouldn't kick back and with the computer and electronic ign this would be hard to do. You would need the compression releases to work without the start button and go off when the bike started.... Just weld a kick arm onto your tranny and look cool....
:old2: :oldlaugh:X2
 

cdogg556

Guru
Yeah don't think you could kick start that thing! Put a plunger type start button on your starter. Starters themselves don't usually fail, it's always the solenoid or an electrical issue. Put that plunger on there and as long as you have juice it has no choice but to turn.
:agree: http://www.wildsteedworx.com/index....info&cPath=65_68_173_82_88_98&products_id=964

Just make sure you disconnect the green wire to the starter before hitting the button, it will fry the EHC supposedly, that's what DOC says anyway.
 

BWG56

Guru

Miguel Flores

New Member
Well apparently its been done and for the record mine has an 80 c.i shovel in it and isnt a big dog its a bbc sled 300 i built from random parts cuz no one would finance me and those that would wanted too much cash for trash bikes plus I figure they call them choppers because you gotta chop stuff up to make stuff fit XD but yeah its been done so there is hope i think if i cant find this tranny im going to put a center stand on it and then find a way to weld one of those early 1927 indian scout kicker pedal gear things on the right side of the tranny or maybe by the starter ring Screenshot_20170916-233523.png
 
Top