Horn and low beam problems BD Chopper DT 2004

H Sol

Member
Hello guys. This may seems to be a dummy question but I can't find where the horn should be in a 2004 Chopper DT. Also, the hi and low bean is not working. The front light remains in hi all the time. Any place I can start looking? I just got the bike 3 weeks ago and still in the learning process.
 

TapioK

Well-Known Member
Hello guys. This may seems to be a dummy question but I can't find where the horn should be in a 2004 Chopper DT. Also, the hi and low bean is not working. The front light remains in hi all the time. Any place I can start looking? I just got the bike 3 weeks ago and still in the learning process.
Broken low bulb and next to the rear tire on frame
 

H Sol

Member
guess there is no horn in the bike. I can't find it. How does this looks alike? also, both sides of the fork are leaking fork oil. Where may I find the seal kit or o rings for this kind of fork?
 

bdm7250

Guru
Supporting Member
:yesnod::yesnod: upgrading to LED's and I'm going to put one of these in the Dog to see if it fits, no moving parts like a fan and LED's both sides, here's a pic with just one headlight with it in on low beam, found them on the Spyder forum:D $110/pair
View attachment 37003 View attachment 37004
That's nice of you workin on Sue's new wheels..:oldhardlaugh:she will be able to see the road real good with that set of LED's..:old2:
 

BWG56

Guru
That's nice of you workin on Sue's new wheels..:oldhardlaugh:she will be able to see the road real good with that set of LED's..:old2:
Anything she wants I will do, my momma didn't raise no fool, I also added the driving LED lights right below each mirrors and I'll tell you one thing, it is nice to work on. Take the panels off add the screws and fasten the lights, plug them into the connectors that are already there, pull the control panel and pop the button out and put the new switch in and plug the connector in that was attached to the dummy plug and your done, period.
And yes the Dog is tied up to the wall, I'm gonna get a small swiffer to dust it off occasionally.:oldhardlaugh:
 

Th3InfamousI

Administrator
Staff member
:yesnod::yesnod: upgrading to LED's and I'm going to put one of these in the Dog to see if it fits, no moving parts like a fan and LED's both sides, here's a pic with just one headlight with it in on low beam, found them on the Spyder forum:D $110/pair
View attachment 37003 View attachment 37004
Go tell your new spyder forum wanketts

Bet you can swap recipes and how best to polish knobs over there.

Hahaha


Sent from my 2PS64 using Tapatalk
 

BWG56

Guru
Go tell your new spyder forum wanketts
Bet you can swap recipes and how best to polish knobs over there.
Hahaha

Sent from my 2PS64 using Tapatalk
Funny thing is I'm always working on the Dog, but when I wanna ride, the Candy Ham is always ready to go. Yesterday when I was loading them in the new trailer I had it out running while I put the Dog in and I thought about it over heating sitting there running and then remembered its water cooled:old2: and then thought about running outta gas, oh 7-1/2 gal, nope won't run out for 250 miles, then I thought of the choke and remembered its EFI, shit, life is easy:oldhardlaugh:then I turned its radio on and listened to some music in the drive way, how cool is that:here::willynilly:
 
Top