05 bdm chopper : parked 2 seasons

[BigDog2005_chopper]

one day. went to start my bike, when the sequence and heard no clicks on the decompressions. so i just waited and tried then bang it started (heard the clicks this time)

drove the bike 30 clicks to visit a buddy and bike never started again.

I read the thread on the dreaded 6th pin i thought this could be my very issue but i swamped out with new board still nothing.

will the bike start without the rubber grommet on the right hand side for my is chewed up and i'm NOT buying the left / right combo just for a rubber grommet. I'm sure i can made something. (any ideas would be appreciated)

Battery fully charged.

i swaped starters still nothing. i even replaced the rear compression for the rear head gets hot as the air can't get to it like the front.

i checked all fuses. GOOD.

personally i think it's gonna be a ground.

can someone give my step by steps to check things. i'll print and try em.

i'm be without my dog 2 seasons now. i'm getting frusterated.

:_(

 

[Mr. Wright]

You check all the fuses? All 8 of them?

 

[Th3InfamousI]

So is this a new issue or related to the same issue from two years ago where you needed a new rubber piece? Donna said she would send you one I'm guessing you never got back to her?

http://www.bigdogbiker.com/index.php?threads/67405/

 

[BigDog2005_chopper]

So is this a new issue or related to the same issue from two years ago where you needed a new rubber piece? Donna said she would send you one I'm guessing you never got back to her?

http://www.bigdogbiker.com/index.php?threads/67405/

this is the same issue from then. never been resolved.
Bless her little heart. what's her contact info again plz. i'v moved and lost ALL info.

 

[BigDog2005_chopper]

You check all the fuses? All 8 of them?

yes,ALL fuses are Good.

 

[05chop]

There is a new app out that checks wiring to the fuse box

 

[BigDog2005_chopper]

omg, whatis the name of this app and what is the path for the download, do youhave the link?

 

[BWG56]

Are you sure the one screw holding the right hand board in isn't grounding out on one of the 2 wires to the front brake switch?

 

[lonerider101]

Any lights when u turn key on - headlight, neutral, oil, etc? My ground wire(black) would bind & pull back far enough out of connector when bolting right handlebar control back on to break the ground.

 

[BigDog2005_chopper]

Are you sure the one screw holding the right hand board in isn't grounding out on one of the 2 wires to the front brake switch?

hmm, great question. let me get back to you , i'll need tocheck, this.

 

[BigDog2005_chopper]

hmm, great question. let me get back to you , i'll need tocheck, this.

and i need clarity to my earlier question will the bike start WITHOUT the rubber grommet? my is chewed up and unuseable? i'm waiting to get in contact with Donna on here for one.

 

[BigDog2005_chopper]

Any lights when u turn key on - headlight, neutral, oil, etc? My ground wire(black) would bind & pull back far enough out of connector when bolting right handlebar control back on to break the ground.

I"ll check this , i'll need to now charge up my battery.Get back to you on this.

 

[BBChopper]

Battery, again...

 

[BigDog2005_chopper]

so. donna just replied.

Hi Neil,
Sorry, I do not have just the rubber grommets for the handcontrol switches....... All my PCB switches are in complete sets- left & right with the brake sensor switch $249.99
Sorry, wish I could have helped you out.
Donna.

so if anyone has a rubber grommet for me. plz im me. thanks