Trouble with top motor mount

[Billy413]

top motor mount bolt missing, does anyone know if I can go to a hardware store to get this. If so what size is it. If not where can I order this bolt? Thank you to all who help

 

[Alexey]

address to the a wild steed Works. Curtis. This bolt has a torque of 45 lb ft. Blue Loctite.
http://www.wildsteedworx.com/

 

[pknowles]

It's a 3/8" bolt with a washer. stick a pencil in the hole and measure the thread depth. need a lock washer also and locate on the bolt

 

[Billy413]

address to the a wild steed Works. Curtis. This bolt has a torque of 45 lb ft. Blue Loctite.
http://www.wildsteedworx.com/

Thank you

 

[Billy413]

It's a 3/8" bolt with a washer. stick a pencil in the hole and measure the thread depth. need a lock washer also and locate on the bolt

Thank you very much

 

[Billy413]

found a 3/8 ss bolt at lowes and it did not fit, it slid in the hole so I guess it's 1/2in

 

[Mr. Wright]

I bet he meant to say 5/8''. fine thread.

 

[Billy413]

I bet he meant to say 5/8''. fine thread.

Yes just seen it was fine thread I'll order one off Curtis . Got a 1/2in but wrong thread

 

[Billy413]

Just ordered from wild steed works, thanks everyone for helping me

 

[pknowles]

Sorry about the misunderstanding.

 

[Billy413]

Sorry about the misunderstanding.

No problem at all

 

[BWG56]

Sorry about the misunderstanding.

No problem at all

Ya gotta watch those guys from Virginia

 

[pknowles]

I was looking at part number 7 and he needed number 9.

 

[BWG56]

 

[Billy413]

View attachment 36091

I was looking at part number 7 and he needed number 9.

Yes ,my fault for not stating that, no problems I ordered from wildsteedworks, I ordered both bolts and washers along with a primary gasket