2003 big dog chopper. Need help with the wiring

[Will wood]

Got a 2003 big dog chopper that I am working on. Does anyone know how to install a wire plus wiring harness? The part number is wp 381 bike starts and runs but I only get left turn signal. No tail lights and no brake lights. If anyone has after pictures or more detailed directions that would help please post them.

 

[Will wood]

Looks like most on here are getting away from the wire plus.

I would but it came with the bike. Wire plus will not give any information

 

[Will wood]

I can't find any on there.

 

[BadDawg Bill]

I would but it came with the bike. Wire plus will not give any information

Wire plus won't give any warranty also. Throw it in the garbage and save yourself a lot of time and $$. Go old school and ride...

As much as I know about wiring I had a dealer put a WP unit on my bike because it looked so complicated. It lasted 200 miles at a cost of over $1,000....

A simple rewire old school will cost ya about $200 and if you want turn signals then buy a Badass unit which is simple to install and about $80.

 

[Will wood]

Wire plus won't give any warranty also. Throw it in the garbage and save yourself a lot of time and $$. Go old school and ride...

As much as I know about wiring I had a dealer put a WP unit on my bike because it looked so complicated. It lasted 200 miles at a cost of over $1,000....

A simple rewire old school will cost ya about $200 and if you want turn signals then buy a Badass unit which is simple to install and about $80.

Yeah that's my only issue is turn signals,brake lights and tail lights

 

[HMAN]

Check all the grounds. There are a quite a few bundled together. Make sure one hasn't worked loose. I made 3 separate bundles for my WP install.