Kansas Spring
- Thread starter HMAN
- Start date
47 and overcast in PA. Good weather is not to far away.
I'm with ya. Clutch started getting soft on me on my 100 mile ride yesterday since I'm meeting up down south here in a few weeks figured I'd double Check the hub nut. All good in the hood! Wasn't loose good peace of mind as I plan on putting at least 1500 miles on in 2 weeks.
Now I gotta put it all back together. Probably adjust the push rods too.
Sent from my 831C using Tapatalk
Just noticed I am missing something
Sent from my 831C using Tapatalk
Sent from my 831C using Tapatalk
Better keep a low profile with the Honda..
Nobody likes a show off.
SKOGDOG
One of the old ones.
This is why God invented Loctite!Just noticed I am missing something
Sent from my 831C using Tapatalk
Thought I did put it on there ! Whoops maybe not.
I think hardware store is closed today so bolt will have to wait till tomorrow. Although I bet I got one in the spare parts bin somewhere
Sent from my 831C using Tapatalk
Well would have been better if I didn't use loctite. Found a bolt in my parts bin but it won't screw in with the old one in there
Sent from my 831C using Tapatalk
Sent from my 831C using Tapatalk
gonna hafta put a weight limit on your chickies if they're gonna break stuff.
and if the clutch nut was tight, what was up with the soft clutch?
BWG56
Guru
Yeah, gonna have to stop takin Gary's girls riding
Yahtzee ...nice when a shitty situation comes out okay.
I was able to weld a nut on and she came out took a couple tries to get it right but drilling that out I would have been here all night!, ran a tap down the holes and back together!
Now onto the pushrods a few hours later...
Sent from my 831C using Tapatalk
I was able to weld a nut on and she came out took a couple tries to get it right but drilling that out I would have been here all night!, ran a tap down the holes and back together!
Now onto the pushrods a few hours later...
Sent from my 831C using Tapatalk