2008 big dog won't turn over or start.
- Thread starter 08Graybigdog
- Start date
If ya happen to get a moment Nathan, how about a quick introduction? Let us get to know ya!
Coolbreezin
Active Member
I got my slam button from Curtis once my Start button died. Ultimately going to clear all the crap off my bars.
Here you go, this is what they were talking about cleaning the solenoid.
http://www.bigdogbiker.com/threads/how-to-clean-solenoid-contacts-on-the-starter.10327/
http://www.bigdogbiker.com/threads/how-to-clean-solenoid-contacts-on-the-starter.10327/
Dusty.B
Member
Same here, I got mine from Curtis for my 04. I have an extra one if anyone needs it. Brand new, always a good backup to have imo
SKOGDOG
One of the old ones.
Check the circuit breaker. It is located on a little block beside your battery (on the left as you straddle the bike and look down at the battery. Get a flashlight, and it's easier to see if the Sid cover is removed. You don't really notice it at first, but it's a little plunger facing the rear (on my K9), and you'll know right away if that's it because it'll click into place, just as you'd expect a circuit breaker to do.
Then you'll have to figure out what tripped it.
Then you'll have to figure out what tripped it.
BWG56
Guru
francoblay1
The Spaniard
phatchopper300
I just wanta ride
Had same issue found out it was my ECM. HAD NO SPARK or FUEL. Got another ECM all is good.
Sent from my SAMSUNG-SM-G928A using Tapatalk
Sent from my SAMSUNG-SM-G928A using Tapatalk