pauldeepsea
Guru
X2 ! Labor Day !!! Just saying I don't care for the metzlers... It could be other things like bearings or fork fluid but they didn't hold a candle to the Avons and my Dunlop elite on the Pitt has been great
Metzlers tire wear
- Thread starter pauldeepsea
- Start date
kickstart
Well-Known Member
What weight?
pauldeepsea
Guru
20 weight going to change to 30
Hey Paul. Just threw a set of Elite 3's on the Pit. Did you encounter any belt rubbing? I've got about .03 at best clearance. Belt hits in one spot. Not sure of a good way to shave the side either. Tried a Dotco and angle grinder. Not good for taking off rubber. May just need a fatter pulley spacer?
francoblay1
The Spaniard
Alright here and noe..... you sounded like one of these fuckwards Arabs from here,,, can you translate in normal "English· please<' wnanketeer!!
Jezzzzzzzzzzzzzzzzzz
francoblay1
The Spaniard
Oh yeah... I knoe I know.. very fresh coming from me, right?Alright here and noe..... you sounded like one of these fuckwards Arabs from here,,, can you translate in normal "English· please<' wnanketeer!!
Jezzzzzzzzzzzzzzzzzz
...............
fuk it cunt find it noe,, xorry.
francoblay1
The Spaniard
BWG56
Guru
Normal engrishAlright here and noe..... you sounded like one of these fuckwards Arabs from here,,, can you translate in normal "English· please<' wnanketeer!!
Jezzzzzzzzzzzzzzzzzz
Have you ever used a metal file to deburr the sharp edges on a metal, from cutting it? Well if you have a woodworking file or wood rasp, is the same concept except the rasp has bigger teeth to chew the wood quicker.
francoblay1
The Spaniard
sorry............... out of order.. goof night............................................
francoblay1
The Spaniard
Fuck me.. your awake... I was closing don... and apologizing too... i was talking ti myself.... fucking desert....Normal engrish
Have you ever used a metal file to deburr the sharp edges on a metal, from cutting it? Well if you have a woodworking file or wood rasp, is the same concept except the rasp has bigger teeth to chew the wood quicker.
francoblay1
The Spaniard
When Sole rides with you on the yellow bitch are her knees up under her chin? Just wondering since you rear foot peg mounts are on backward,
I am lloking for a pic............... stanby bro...
francoblay1
The Spaniard
oh yeah... its the last one....... you know what i meean... Doc said "You better"......
i think what you are talking about is a Nicholson #49 pattern maker's rasp and then finish up with a #50 Nicholson pattern maker's rasp.
pauldeepsea
Guru
Mine did rub a bit and had to adjust the alignment on the rear tire a bit. I did not file the tire down and the tire is wearing even
Good to hear. Doug from C.A. Jones told me the factory specs are +/- .125. The dang machinist in me tries to keep them within .005.....lol. I'll have to re adjust.
Last edited:
pauldeepsea
Guru
Riding today and found this! Avons are ready to go on! Don't think I will ever go back to metzlers
pauldeepsea
Guru
Well avon has a registration for their tires with a 15k warranty. I have used Avons in the past and they sure lasted a lot longer and sure as hell didn't show the belt like this.Never say never, you might change you mind about that after 1-2K miles if you get lucky like some of us did.