March Madness sell on LED Headlight

[KaptinAmerika]

LED Headlight

 

[liferider]

Curtis, riddle me this: with the LED turn signal front lights. I saw a thread where someone put them up front. Can they also be put in the rear for turn lights, running lights, & break lights?

 

[KaptinAmerika]

I would suspect that they do not make a rear version, red instead of amber, as it would likely violate most states traffic laws involving spot type lights facing to the rear of the vehicle.

 

[liferider]

I would suspect that they do not make a rear version, red instead of amber, as it would likely violate most states traffic laws involving spot type lights facing to the rear of the vehicle.

I have red lenses so I would not care. This is Louisiana man! would the light it's self work?

 

[KaptinAmerika]

LOL..Fn rednecks..
I am politically correct saying that as I was born in Memphis Tennessee....LOL

The other issue would be, I am fairly certain, the front are dual function and the rear are three function.
But I am not a dealer for them, they want me to carry a large amount of liability insurance which I can't afford right now, so I don't pay allot of attention to their products.

 

[echoniner111]

 

[echoniner111]

This is why I had no lights coming home from Bike night Thursday ..

 

[KaptinAmerika]

Yep, common issue with the BDs

Another great feature of the LED light, no real heat to deal with

 

[echoniner111]

Yep, common issue with the BDs

Another great feature of the LED light, no real heat to deal with

I'm gonna need to replace that connector .. where can I get 1 ?

 

[KaptinAmerika]

H4 headlight socket

 

[echoniner111]

H4 headlight socket

White is the ground correct..

 

[KaptinAmerika]

Black is ground
White is High Beam
Yellow is low beam

 

[flcmcya]

I have these installed in both my dogs now......Very nice!

Tanks

 

[echoniner111]

I know which wire is the ground in the bucket , which is the ground on the bulb white , green or blue ?

 

[echoniner111]

Got it ... works great ... what's everyone's trick in tightning the beauty ring ... I have less room with Adjure ...

Thanks in advance

 

[mittens]

did anyone ever confirm for me?

low beam does all 3 LED diods lit? or just 2?

and when on High is it just that the 3rd diod lites? or do all 3 get brighter.

 

[Dragonslave]

did anyone ever confirm for me?

low beam does all 3 LED diods lit? or just 2?

and when on High is it just that the 3rd diod lites? or do all 3 get brighter.

Low beam = 2 bulbs lit
High beam = 3 bulbs lit

High = all 3 lit; no more brighter


Trick is with the beauty ring is to get some gloves that have the rubber grippers on the finger tips. You can get it tighter with those. Don't forget to locktite the set screw at the bottom so it doesn't vibrate out.

 

[mittens]

Well all 3 of mine are lit, so i guess when they har wired it they just wired it for bright ha. screw adding a button then

 

[Dragonslave]

Well all 3 of mine are lit, so i guess when they har wired it they just wired it for bright ha. screw adding a button then

Could be that you wired up backwards.

 

[Jwooky]

"high beam' is not usually brighter, it merely aims the beam higher and therefore further out.
These illuminate the third LED in "high beam", which best I can tell only makes it brighter, and does not change the aim.

Therefore, no real reason not to have all three lit all the time, and you don't really have a "high beam' setting.