My new pup 05 ridgeback

Energy One
johnle712

johnle712

Active Member
TimNY said:
Nice RB
Congrats !
Let us know how the ride is .
Click to expand...
Thanks Tim. Riding ridgeback ...hm...is like Girl on high heel. High heel make them look good but hurt like hell :). I Love the look of ridgeback but riding it man ....maybe i am getting old :(.


francoblay1 said:
Watch those top spikes :eek:



Very nice, congrats. :2thumbs:

:cheers:
Click to expand...
Thanks Franco. You like them Twin Peaks dont ya...lolz. Hope you get your yellow bitch straight and put her back on the road.


Brew said:
I love the color looks like my Ridge lol Who is the belt drive made by? I might have to get one... :D
Click to expand...
Thanks Brew. Btw, i really like your Orange Crush photo.

Mr. Wright said:
That's an Ultima belt drive Rob, same thing I'm running.
Click to expand...
Thats what i thought but i wasnt sure. Shannon, do you have to modified your stock (Baker) transmission to work with Ultima belt? Tranny on my bike is not Baker. I wonder why they switch?


BadDawg Bill said:
On the Solo controls, they were made by PM a few years back but are no longer stocked. They still have the same shape but without the Solo engraved. Found this out on another site for ya.
Click to expand...
Cool. Now i know where to look for. Thanks Bill.
 
Brew

Brew

Troop Supporter
johnle712 said:
Thanks Tim. Riding ridgeback ...hm...is like Girl on high heel. High heel make them look good but hurt like hell :). I Love the look of ridgeback but riding it man ....maybe i am getting old :(.




Thanks Franco. You like them Twin Peaks dont ya...lolz. Hope you get your yellow bitch straight and put her back on the road.




Thanks Brew. Btw, i really like your Orange Crush photo.



Thats what i thought but i wasnt sure. Shannon, do you have to modified your stock (Baker) transmission to work with Ultima belt? Tranny on my bike is not Baker. I wonder why they switch?




Cool. Now i know where to look for. Thanks Bill.
Click to expand...
Thats interesting, your not running a Baker trans? I don't think that belt drive would work on mine. I haven't heard of many running them other than Karata or Baker open primaries on the older models. What trans do you have? Ultima or Roadmax maybe?
 
johnle712

johnle712

Active Member
Brew. I wish i know. All i can tell you that the cover of the tranny is different compare to my k9. Ill post a picture when i have a chance.
 
BadDawg Bill

BadDawg Bill

Well-Known Member
Brew said:
Thats interesting, your not running a Baker trans? I don't think that belt drive would work on mine. I haven't heard of many running them other than Karata or Baker open primaries on the older models. What trans do you have? Ultima or Roadmax maybe?
Click to expand...
He probably has a different case with Baker guts. BD did that. Mine has a Jims case, Baker gears and I have an Ultima 3.5 belt drive too. Our bikes are LHD though....
 
Brew

Brew

Troop Supporter
BadDawg Bill said:
He probably has a different case with Baker guts. BD did that. Mine has a Jims case, Baker gears and I have an Ultima 3.5 belt drive too. Our bikes are LHD though....
Click to expand...
Bill, If he has a different case then someone other than BD did it. Our 05 models came with Baker transmissions, unlike the earlier models that had different cases with Baker guts...:D

Looking at his pics more better it looks like they took the DSSC set up out. That's why the belt system is working on his scoot...
 
Last edited:
BadDawg Bill

BadDawg Bill

Well-Known Member
Brew said:
Bill, If he has a different case then someone other than BD did it. Our 05 models came with Baker transmissions, unlike the earlier models that had different cases with Baker guts...:D

Looking at his pics more better it looks like they took the DSSC set up out. That's why the belt system is working on his scoot...
Click to expand...
That must have been a lot of work and $$. So in 05 when they went to the RHD they bought Baker trans or did they buy Baker parts and put them together themselves?
 
P

pauly

Active Member
Drop Starter Slam Clutch


In 2001 we introduced Right Side Drive (RSD) for ground-up, wide tire customs. Any primary drive setup could be used in conjunction with RSD, but there was a problem. Actually not a problem but more like an opportunity. Using a left side drive primary in conjunction with RSD left a gaping hole between the inside of the primary and the left side of the transmission case; the space once occupied by the left side drive pulley. Our new DSSC primary slams the clutch inward 2.3" into the space once occupied by the pulley; thus the phrase SLAM CLUTCH.

While we were slamming the clutch inward, we rotated the starter down into the vacant space behind the transmission case; thus the phrase DROP STARTER. Lowering the starter in the chassis permitted seat heights to be lowered up to 2.5". It also cleaned up the left side view profile.

DSSC is a complete drivetrain unit consisting of a Right Side Drive transmission and an enclosed primary drive. The inner primary, outer primary, tranny case, trap door, top cover, and pulley shroud are all carved out of 6061-T6 billet. We cut no corners to make this premium drivetrain look like Tiffany jewelry and take punishment from a big inch motor.

DSSC is a complete RSD drivetrain system and is compatible, without modification, with Daytec, Rolling Thunder, Dakota Thunder, and similar RSD Softail and Hardtail frames with zero engine offset and a " left tranny offset. The " offset is built into the inner primary; no spacer required. DSSC is set up for 240/250 tire applications using a 1" belt. 280 and 300 tire applications are possible with a 530 O-ring and an offset sprocket, call for details.

Paul
 
Brew

Brew

Troop Supporter
BadDawg Bill said:
That must have been a lot of work and $$. So in 05 when they went to the RHD they bought Baker trans or did they buy Baker parts and put them together themselves?
Click to expand...
Bill, all Baker for the 05 and up! Both my 05 and 08 have the DSSC set-up. I did some searching and it looks like he's running a Ultima 6 speed on his Ridgeback. That's why the belt drive fits his 05. Your right, someone spent some cabbage for the mods on his scoot, but it looks really good. They did a great job...:D :2thumbs:

 
P

pauly

Active Member
Rob, Mr Wright - Shannon wrote a thread on this forum about the Ultima belt drive
installation on his bike. He had to make a little modification for it to fit our 2005 and up bikes.

Paul.
 
johnle712

johnle712

Active Member
Brew said:
Bill, all Baker for the 05 and up! Both my 05 and 08 have the DSSC set-up. I did some searching and it looks like he's running a Ultima 6 speed on his Ridgeback. That's why the belt drive fits his 05. Your right, someone spent some cabbage for the mods on his scoot, but it looks really good. They did a great job...:D :2thumbs:

Click to expand...
Yep. Thats it. So my pup has Ultima six speed tranny. Brew you are da-bomb.:2thumbs:
 
johnle712

johnle712

Active Member
@Brew: so it is cheaper and less hassle to go with Baker OP instead of getting ultima OP and tranny right? So did Baker not offer OP back in 05? And this was the only option.
 
You must log in or register to reply here.
Top