A Proglide in a box, need a little help.

[Piddler]

Hello to all,
I just bought a 1997 Proglide in a box, I need a wiring diagram for this project.
Does anyone have one you can email me or post.
Think I can figure out most of the rest, just a lot of wires that need to go somewhere.
Thanks

 

[CHOPTOP45]

Please do a introduction first then some one will be along to help.

 

[francoblay1]

Please do a introduction first then some one will be along to help.

:2thumbs:



Piddler,

Thanks for the Intro http://www.bigdogbiker.com/forums/introductions/59481-hello-out-there.html :2thumbs:

Somebody will jump in here to help you shortly.

 

[Piddler]

Just wondering, this bike does not have a turn signal module, don't know if it was taken off by the guy that had it before me or if it never had one. It does have a 2 prong flasher that feeds the switches on the handle bars, but when I let up on the button, it will not flash anymore. Not sure if the switches should lock in (turn on) when pressed and unlock (turn off) when pressed again. Does it need some kind of module, or can I make something that will work. Remember, this is a 1997, who knows how they (Big-Dog) did thing back then. Does anyone have a manual that might show a pic or tell anything about a module or how it was done.
While we are at it, are they a Harley seat that might fit this, the seat on it is a little wide.

 

[BBChopper]

Sounds like a scratch build to me!:2thumbs:

 

[Piddler]

Thanks
I have a turn signal module ordered,
would like to had a print on the bike, its just wires, no big thing, I'll figure it out.
Eddie

 

[byrddog]

Hello, the turn signals are old Harley style, they only work while you push them in. Do not know of a diagram for those bikes. As far as the seat goes I would like to know of a match myself.

 

[Piddler]

A little update, guess I didn't need a print, I cut all the wires loose on the bike at the block, traced them back, added the module, butt connected them back together, put the tanks back on and cranked it. Its charging, got all indicator lights, brake and tail lights, dim and bright head lights. Looks like as far as the wiring, I'm ready to go. Next stept, seat and speed-o-meter.

 

[Piddler]

Ok, bike seems to be doing pretty good, time to move on. Went to a local motorcycle shop that has a lot of Harley stuff looking for a seat, we never found one that would fit. Does anybody have a good seat or know what the part number from the Mfg might be. It has a tag on the seat but I can't make out the part number. Next comes the pipes, want to put a set of VH 2 into 2 pipes, but same thing, they have no listing as to what might fit. Can anybody give any good info or help on my new problem.
Thanks