wp 374 no fire to coil question

[Slider]

In this wireplus diagram, should plug#3 pin#5 (ignition output) be 12 v hot when I start the bike? Right now, bike cranks but no 12v hot to coil. I checked everything and this is the only thing I could find that might be the problem. Module is 4 years old and this is really the first electrical problem I had since I installed the wp374. Thanks!

 

[DRBarnhart]

... should plug#3 pin#5 (ignition output) be 12 v hot when I start the bike?

Yes it should. That's where the power to the ignition module and the coil come from.

Right now, bike cranks but no 12v hot to coil. I checked everything and this is the only thing I could find that might be the problem.

If there's no power there it's definitely a problem!! :down:

Dennis

 

[Slider]

Thanks Dennis, I'll call wireplus on Monday to see if they can bench test it.

 

[Slider]

Thanks Dennis, I'll call wireplus on Monday to see if they can bench test it.

Wireplus wants the control model back to check it. Keep you posted

 

[Slider]

Bad switch module. Got new one from wireplus. IT'S ALIVE! I'm back in business

 

[Mickeetwo]

Thanks for the update....Glad your up and running :2thumbs:

 

[Brew]

Good to see you're up and running again... :2thumbs: