V
Guru
The specs in the 05 manual (TP rocker boxes) called for 4 turns (24 flats). There was also a note that said some noise (ticking) may be lessened by setting the pushrods at 3 turns (18 flats). I'm not sure what the 06 manual called for thou. I did the 3 turns and it just seemed to be to tight so I ended up going with 3 1/2 turns. I marked my pushrods with 1 dot on one side and 2 dots on the other side. Used a blacker marker which just wiped off easily.
If yoiu start off with 4 turns then want to try some thing else it just takes a little time. When ever I was doing mine I always had something else to be fooling with so I would not stare at the thing for 15-20 minutes.
If yoiu start off with 4 turns then want to try some thing else it just takes a little time. When ever I was doing mine I always had something else to be fooling with so I would not stare at the thing for 15-20 minutes.
