Engine drive nut and Clutch hub nut size.

[c.c.rider]

Hey everyone need a little help. I'm getting ready to pull my transmission and want to make sure I have all the right tools before I start.I need the socket size for the Engine drive nut and Clutch hub nut. Thanks in advance.

 

[c.c.rider]

Nobody out there knows the size of these a little help please.

 

[woodbutcher]

in my '07 manual, it calls for a 7/8-14 engine sprocket nut, and guess what, it doesn't give the size of the clutch hub nut (but it is left hand thread).

 

[hayseed]

1 5/16 engine hub right hand,,,, I used 30mm on tranny,, left hand

 

[c.c.rider]

Thanks hayseed I went and picked up the two socket. Thanks again:2thumbs:
Thanks woodbutcher

 

[hayseed]

np... curious why your pulling the tranny -- i am concerned going forward that mine may need some work to hold on the 140HP my motor I put in it. (work in progress) one member here has been helpful for me but i have not sent him anything yet but Bobby Schulz seems to have a good rep for rebuilds .... anyway the 30mm socket seemed to fit perfect and i did not have the US equivalent in my toolbox...' cheers

 

[Fibersnake]

Clutch nut is 1 3/16" though many have used the 30mm with sucess!

 

[BWG56]

Clutch nut is 1 3/16" though many have used the 30mm with sucess!

1 3/16 = 1.187
30 mm = 1.181 very little difference

 

[Fibersnake]

1 3/16 = 1.187
30 mm = 1.181 very little difference

True as long as you do not have to beat the 30mm on to fit over that .oo6"