.600 installed
- Thread starter TXDOG
- Start date
PA Chopper
Active Member
SWEET!!
echoniner111
Active Member
springs
Did you change out valve springs, if so what did you go with. Sweeet scoot :2thumbs:
Did you change out valve springs, if so what did you go with. Sweeet scoot :2thumbs:
TXDOG
Wide Open Throttle
The springs that are in our bikes are suitable for the .600,but no more. Anthony(aka RAZOR) has done alot of research on this and has installed the .600 on over 20 bikes in the past 2 years without any problems. Going with bigger springs on a .600 is just someones opinion,and S&S tech dept says it was best,since the 117 was built around the .600 to start with.
Nukeranger
Nukeranger
:2thumbs:Sounds great:2thumbs:Excuse my ignorance, but what cam comes OEM? Thanks in advance for the info. I also have a 2008 RB.
echoniner111
Active Member
Pretty sure its .546
:up:
:up:
PaulHart
Well-Known Member
:iagree:
outdoorsman26
Well-Known Member
546 cam stock. yes, you can the cam for a 600 or a 585 without changnig springs as long as you DONT have the beehive springs!!! just remenber you are at the limits of the springs changing them to 650 springs in not a bad idea!!! souns great have fun with it this summer!!!
erldawg
Guru
Mine was a .546 2008 K9
nine lives
Active Member
Damn that sounds great! I was going to go with the 585 for a bit more lower end. Let us know if you feel a loss in lower end torque and also a noticable increase in fuel consumption.
TXDOG
Wide Open Throttle
my mistake on the 08's having .528
avdhunter
Active Member
No wonder mine sounds like a whizzer!!!!! Lena just got my 585 in. That 600 sure sounds good tho!!!!