Compression Releases in the cam?

Energy One
Coolbreeze

Coolbreeze

Active Member
Mid 03 BD ran heads that were already machined for the electronric releases. Reach down through the center of your front rockerbox. If you feel a head of a bolt, your can install electric releases without to much of a hassle. The releases are about $295.00
 
Madrad123

Madrad123

Member
Wiring the electronic CRs is a complete pain in the ass. I would suggest just taking the heads off the bike and having them machined out. OR go to Drag, Mid West or CCI and buy the Compression Release install tool and actually do it while the heads are still on the bike. Just use a vaccum and an airblower to make sure no aluminum shavings creep past the baby hole.
 
MARV

MARV

Well-Known Member
Madrad123 said:
Wiring the electronic CRs is a complete pain in the ass. I would suggest just taking the heads off the bike and having them machined out. OR go to Drag, Mid West or CCI and buy the Compression Release install tool and actually do it while the heads are still on the bike. Just use a vaccum and an airblower to make sure no aluminum shavings creep past the baby hole.
Click to expand...
i wired up a set on a BD 107.

S&S has instruction sheets on their site.

stupid simple
 
john sachs

john sachs

Well-Known Member
I've done some 124's with big compression.The S&S compression release cams get the job done. :up:
John
 
V

V

Guru
Okay showin my my lack of knowledge hear. But can't ya just remove the plugs in the top of the head and put manual realeses in there? I would rather have then than soemthing electric. Mine work fine, bbut was just thinkin about if a prob develeped later. V
 
erldawg

erldawg

Guru
V said:
Okay showin my my lack of knowledge hear. But can't ya just remove the plugs in the top of the head and put manual realeses in there? I would rather have then than soemthing electric. Mine work fine, bbut was just thinkin about if a prob develeped later. V
Click to expand...
My thoughts as well and would alot less expensive...
 
You must log in or register to reply here.
Top