Got Flipped

[Bubba_BigDog]

Flipped the plate today... just as easy as it looks in the write-up (awesome Gas :tup.

However I didn't get them countersunk all the way... I've only got a handful of bits so I went from 1/4" to 25/64". I tried to use the 1/2", but without a press, it didn't want to go right on. So they stick up a hair... but not noticeable once the plate is on.

The other "mod"... I got my Texas plates in today. Tired of WSP hasseling me in my truck, so I got plates for it and for the bike while I was at it.

 

[EZ]

Looks great bro. :2thumbs:

 

[Mickeetwo]

:2thumbs:

 

[nine lives]

Flipped my plate also. Here in PA not allowed, got pulled over given a warning, put back to oem. Check you states laws.

 

[LukeDM]

Looks nice! Can you take pictures of what the engine side looks like? That's always been my concern with doing it... :down:

 

[Bubba_BigDog]

Just took a couple with my cell... didn't realize the lighting was as bad till just now. I can't really compare much though as I never did look down to see how it looked before.

 

[stryfox]

Flipped my plate also. Here in PA not allowed, got pulled over given a warning, put back to oem. Check you states laws.

Been ridding in pa for 15 years. Ran fliped tag on my last bike since 1997 ish.
I flipped the tag on my dog and haven't had a problem yet....

 

[LukeDM]

Cool! :flag: Not nearly as bad as I was afraid the back would be. I like the look a lot. :up:

 

[Bubba_BigDog]

Here's a slightly better shot... seems like the only holes visible now than before are the two horizontal holes and the drain hole I drilled.

 

[V]

Make sure to put some silicone in the exposed hole that leads to the leds. Water will get in a kill them.:2thumbs:

 

[Bubba_BigDog]

Is that the oblong hole there? I didn't think much of it since it appeared to be in the open before.

 

[Gas Man]

Glad that how to helped. It's pretty easy. Watch your 6. I hear cops with budget crunched cities are starting to write tickets for these stupid little things.