bdmridgeback
Low Down Chop Shop
Wire-Plus 2004 Conversion, Parts, Labor*-*Low Down Chop Shop
Well, have been working on a few new items on my website and finally got this up and posted.
This is a complete pre-wired Wire-Plus WP374 module to a New 2004 BDM backbone harness ready to install in your bike. You send me your coil cover without the coil. I install the WP148 switch in your coil cover. Pre wire the WP374 to the new BDM backbone harness along with the switch pigtail.
All you'll need to do is mount the 2 modules, put your coil back in the coil cover, pull the new BDM backbone harness up your backbone, snap the pins into the sockets and plug them back in. Hook the positive and negative battery cables to the battery, plug in the deutsch connector on the ignition switch and put the coil cover back on the bike. and your ready to ride!!!
Forum members will still get the 10% off of this service which puts it at a very good price over taking it to a dealer and getting charged for 6-8 hours labor at $70-90 an hour.
THIS ISN'T AVAILABLE FOR 2005-2009 MODELS YET
Due to the backbone harness and power harness together being almost $150 more money over the 2004 models.
Wire-Plus 2004 Conversion, Parts, Labor*-*Low Down Chop Shop
Well, have been working on a few new items on my website and finally got this up and posted.
This is a complete pre-wired Wire-Plus WP374 module to a New 2004 BDM backbone harness ready to install in your bike. You send me your coil cover without the coil. I install the WP148 switch in your coil cover. Pre wire the WP374 to the new BDM backbone harness along with the switch pigtail.
All you'll need to do is mount the 2 modules, put your coil back in the coil cover, pull the new BDM backbone harness up your backbone, snap the pins into the sockets and plug them back in. Hook the positive and negative battery cables to the battery, plug in the deutsch connector on the ignition switch and put the coil cover back on the bike. and your ready to ride!!!
Forum members will still get the 10% off of this service which puts it at a very good price over taking it to a dealer and getting charged for 6-8 hours labor at $70-90 an hour.
THIS ISN'T AVAILABLE FOR 2005-2009 MODELS YET
Due to the backbone harness and power harness together being almost $150 more money over the 2004 models.
Wire-Plus 2004 Conversion, Parts, Labor*-*Low Down Chop Shop
