HELP PEGs

[RAM]

Hey guys What up with this my last post on this.

http://www.bigdogbiker.com/forums/how/341-how-swap-out-pegs-grips-2.html

 

[Thumper169]

Whats the problem, it's pretty simple.

 

[RAM]

OK here we GO I have an o4 PIT and on my pegs. The break and gear, The top ones on the BigDog. The stock ones have a hole with a very small peg that goes in it. And my new ROULETTEs don't have the hole.
Any takers???

 

[drummin777]

Someone correct me if I am wrong. Your stock brake/shifter are flat on the top. the additional peg is to keep them from rotating once you bolt them up, and to postiion them as you bolt them up, keeping the flat side in the same location (up). Your roulette (sp?) are round all the way around, so it doesnt matter how you bolt them up, it's all the same. So they dont need the little peg to position them. Am I making sense?

 

[RAM]

So that small peg comes out? I'll go check and post pic to show what I am talking about.

 

[DRBarnhart]

You don't even have to use the little postioning "dowels" with the stock pegs if you prefer a different angle than stock...

So don't use 'em!

Dennis

 

[RAM]

You don't even have to use the little postioning "dowels" with the stock pegs if you prefer a different angle than stock...

So don't use 'em!

Dennis

Thanks for the HELP guys.....................

 

[Dead Stroke]

I just recently put roulettes on. NO orientation on the toe pegs are necessary due to there symetrical shape. as such you have no pins for use in the arms.

 

[RAM]

I just recently put roulettes on. NO orientation on the toe pegs are necessary due to there symetrical shape. as such you have no pins for use in the arms.

Very Nice Scoot Mark :2thumbs:

 

[Dead Stroke]

thx ram

 

[Oscar Maldonado]

Hey guys What up with this my last post on this.

http://www.bigdogbiker.com/forums/how/341-how-swap-out-pegs-grips-2.html

Were you talking about my post??????