Brake and throttle cable hitting tank when bars turned turned

[Exotic]

I did a search but it didn't turn anything up. When the bars are turned full right the ends of the cable right after the 90 degree metal bend in the line hits the tank. I put touch up paint on it, but it does it again:bang:

Is there an easy fix for this?

 

[Thumper]

You need to rotate your controls. I had the same problem

 

[barhopper]

Could it be the bushings? My bushings went bad and did the same thing. New bushing and the bars were where they were supposed to be.

 

[Exotic]

You need to rotate your controls. I had the same problem

I didn't figure it could be that easy. I went out and took a look again, 2 bolts and a rotation later... I feel humbled.

That did it! Thanks

 

[rackman]

You said 2 bolts. There is a set screw that you should tighten if you moved the controlls with the 2 bolts, otherwise the set screw will come loose over time and your controlls will will rotate while you are riding.
Guess how I know.

 

[TheDeadOne]

Guess how I know.

You got a "Free Ride"?

"You're not supposed to complain about a "Free Ride" said the lady that gave it too you!

"Free Ride" = :SEX:

:roll: :roll: :roll: :roll: :roll: :roll: :roll: :roll: :roll: