I've had in the past a whole lot of trouble with the EHC and was at one point even kickin' round the idea in getting rid of my bike. Ended up reading up on all of the Wire Plus that Jake was installing at his bike at the time waiting to read about another electrical disaster.
As time went on I read on about others that have done the switch out and figured it was time to dive in head first into it. I contacted Jake and the rest was pretty much history.:2thumbs:
For all that are a little reluctant in heading towards this type of work let me assure you that it was a piece of cake. I'm not one to deal with any type of electrical issues but even I felt that this was on that I would be able to tackle.
The directions were right on and was able to follow them all to the T. :up:
I was a little confused at times, I went as far as emailing alhall and even calling Ray.:lol: :lol: :lol: :lol:
Anyway, the bike is back on the road up and running and I couldn't be any happier!
To some members the wiring would be done in a day but I took my time and had it completed in a week.
Here are some pics-
Wire Plus installed
Through the side
some of the wiring tied up- lots of longer wires. the harness bought was for an 04 chopper.
The bike been sitting here for almost a year:down:
The one thing that I did different that I didn't take a picture of was the new ignition switck, just like Jakes but I didn't use the set screws like he did. I just grinded the cover down to where I was able to utilize the parts provided to hold the switch in place.
Thanks to Jake for helping me out with this and to all that had imput on my previous electrical problems. Hopefully this is the one and only fix.
As time went on I read on about others that have done the switch out and figured it was time to dive in head first into it. I contacted Jake and the rest was pretty much history.:2thumbs:
For all that are a little reluctant in heading towards this type of work let me assure you that it was a piece of cake. I'm not one to deal with any type of electrical issues but even I felt that this was on that I would be able to tackle.
The directions were right on and was able to follow them all to the T. :up:
I was a little confused at times, I went as far as emailing alhall and even calling Ray.:lol: :lol: :lol: :lol:
Anyway, the bike is back on the road up and running and I couldn't be any happier!
To some members the wiring would be done in a day but I took my time and had it completed in a week.
Here are some pics-
Wire Plus installed
Through the side
some of the wiring tied up- lots of longer wires. the harness bought was for an 04 chopper.
The bike been sitting here for almost a year:down:
The one thing that I did different that I didn't take a picture of was the new ignition switck, just like Jakes but I didn't use the set screws like he did. I just grinded the cover down to where I was able to utilize the parts provided to hold the switch in place.
Thanks to Jake for helping me out with this and to all that had imput on my previous electrical problems. Hopefully this is the one and only fix.
glad to here that your back on the road!
