need part # for 06 k9
- Thread starter jerr-06k9
- Start date
V
Guru
Are you talking about the Thunderhart module?
bdmridgeback
Low Down Chop Shop
Thunder-Heart ASM-5012 from Drag Specialties. That is the same one that BDM puts in, only comes with software and cable and is programmable unlike the factory unit.
Your bike will run better with this one in it, trust me!!! Don't buy the stock one!
here is a link of mine:
http://www.bigdogbiker.com/forums/how/7950-how-upgrading-thunder-heart-ignition-module.html
Your bike will run better with this one in it, trust me!!! Don't buy the stock one!
here is a link of mine:
http://www.bigdogbiker.com/forums/how/7950-how-upgrading-thunder-heart-ignition-module.html
bdmridgeback
Low Down Chop Shop
Either buy a used one from one of these guys or buy the ASM5012 Thunder-Heart. Don't buy a new BDM!
jerr-06k9
Active Member
Thanks for the link, but I still have a EHC on my
bike. Does it work with it?
bdmridgeback
Low Down Chop Shop
Yes, the ignition has nothing to do with the EHC. Even if you have the Stock EHC in the bike, and have put a aftermarket exhaust, maybe a K&N or different intake all together and maybe even a .600 cam, replacing the stock ignition module with the programmable Thunder-Heart module will open up a hand full of horsepower!
If you have all the above done and running a stock ignition module, your bike has alot more potential HP to unleash even if you have a stock EHC in it!
If you have all the above done and running a stock ignition module, your bike has alot more potential HP to unleash even if you have a stock EHC in it!
N8KAM
Well-Known Member
:iagree:
Nomad2day
Longhair Redneck Geek
Really...:loony:
As below in the first two places I looked
Thunder Heart Electronic Products
Thunder Heart Twin Cam Stand-Alone Ignition System ASM5012
As below in the first two places I looked
Thunder Heart Electronic Products
Thunder Heart Twin Cam Stand-Alone Ignition System ASM5012
Slow Vince
Active Member
Custom Chrome PtNo is 640330...
Slow Vince
Active Member
Anyone providing this little gem already wired for 'Dogs? Pondering; want to just plug in the new module (and coil), but keep a stock unit as a hot spare...
bdmridgeback
Low Down Chop Shop
You would have to buy the JST connectors from Big Dog and install them. Otherwise, cut the 3 plugs off your junk stock ignition along with about 3" of wire and solder and shrink wrap the connections.
Here is the stock ignition module:
Here is the ASM5012:
Here it is with the plugs on and installed in the stock location:
Here is the stock ignition module:
Here is the ASM5012:
Here it is with the plugs on and installed in the stock location:
NEED HELP FROM THE WISER!
This is an old thread... But I thought what the heck.... I bought the ASM 5012 system in hope that my bike would start.. I got the system today and tried it... still no spark. As I read through all the postings, i may have bought it for the wrong bike... I have the 2004 Chopper DT.. I have just installed the wireplus system and having no luck with getting the bike started.... Checked the spark plugs and still got NO Sparks.... really need the help before giving up and sending the bike to the dog house!:bang::bang::bang::bang:
This is an old thread... But I thought what the heck.... I bought the ASM 5012 system in hope that my bike would start.. I got the system today and tried it... still no spark. As I read through all the postings, i may have bought it for the wrong bike... I have the 2004 Chopper DT.. I have just installed the wireplus system and having no luck with getting the bike started.... Checked the spark plugs and still got NO Sparks.... really need the help before giving up and sending the bike to the dog house!:bang::bang::bang::bang:
