Oil Pressure Guage set-up from Arlen Ness

Energy One
C

chaingunner

Guest
Maybe a dumb question, but before I order one, Does the Big Dogs come with S & S heads?:confused: I know BD assembles them so wouldn't doubt it. I assume they do, but just have to ask...

Newbie dog owner sorry:spank:
 
V

V

Guru
chaingunner said:
Maybe a dumb question, but before I order one, Does the Big Dogs come with S & S heads?:confused: I know BD assembles them so wouldn't doubt it. I assume they do, but just have to ask...

Newbie dog owner sorry:spank:
Click to expand...
Seein that your bike is a 07 it should have six bolts on the top rocker box cover. Six bolts are the S&S covers.:2thumbs:
 
LDO

LDO

The Cleaner
Troop Supporter
How does this setup hold up with vibes. There is another thread on oil pressure guages where they kept leaking the oil due to engine vibes. Anyone have some mileage on this setup?
 
C

chaingunner

Guest
LDO said:
How does this setup hold up with vibes. There is another thread on oil pressure guages where they kept leaking the oil due to engine vibes. Anyone have some mileage on this setup?
Click to expand...
If I'm not mistaking it's the heat of the engine that is melting the filler plug on gauges that are liquid filled that is the major problem, and the vibration is killing the non-liquid filled. If I'm not mistaking. That is why this set up is a little more appealing to me.
 
LDO

LDO

The Cleaner
Troop Supporter
chaingunner said:
If I'm not mistaking it's the heat of the engine that is melting the filler plug on gauges that are liquid filled that is the major problem, and the vibration is killing the non-liquid filled. If I'm not mistaking. That is why this set up is a little more appealing to me.
Click to expand...
I think you are 100% correct on that one CG. I remember that thread now.:2thumbs:
 
1mndg

1mndg

RIDE IT HARD!!!
:2thumbs: Nice set-up. I have it on mine. Swapped it over from my H-D Deuce so it will fit either motor. Nice liquid filled gauge to isolate vibrations. Have well over 20,000 miles between the two bikes.:2thumbs:
 
BBChopper

BBChopper

Supports 2 Disabled Vets
Troop Supporter
V said:
Seein that your bike is a 07 it should have six bolts on the top rocker box cover. Six bolts are the S&S covers.:2thumbs:
Click to expand...
They make a mount for 4 bolt and 6 bolt rockers covers. I have the TP 4 bolt..
 
Slow Vince

Slow Vince

Active Member
:bang:
New Info: DS PtNo DS-245151 = Ness# 11-561 does NOT fit our heads (or Twinkies)...

Does ANYBODY have a source for JUST the Ness mounting bracket?

Slow Vince said:
Ol' Harley bud gave me the guage, about the best looking setup I've seen. Been lurking, to hear if anyone else is using'em. Now just have to come up with the mount, housing, line and tee.

Yeah, I know, get ahold of Nelson...
Click to expand...
 
V

V

Guru
Question is this set up made in USA? I ordered some Arlen mirrors a while back both sets made in China. They were junk ended up giving them away. Not on a mission or anything just curious:hi:
 
Slow Vince

Slow Vince

Active Member
08ridgid said:
Is this the oil pressure gauge that fits the 6 bolt S&S heads?
Ness-Tech #15-666
Click to expand...
Hmmm, Steel Dreams (WA) told me 15-666C was the part number for just the mounting plate. Yes, the plate does match my bolt pattern (and the Harleys too).

Now I'm AWP for the 2-hole adapter...
 
Slow Vince

Slow Vince

Active Member
Another Way to Skin the Cat





FINALLY got around to getting it all to gether. Runs good, looks good (to me at least). Used "stubby" version of the sending unit.

Being longer than the "standard" length rider, I put it on the forward pair of bolts, and I can actually see it while riding!

They call me Slow Vince for good reason...
;^}
 
jimizee028

jimizee028

TRUE COLORS COLLISION
i never got a product from them that didnt seem cheap and made in china...have never been a fan............
 
You must log in or register to reply here.
Top