Latest activity

What's new New posts Latest activity
  • SCOTTx88
    SCOTTx88 reacted to SKOGDOG's post in the thread Brake pad retainer clip with Like Like.
    Ordered and expected in 3 days. My rattlin’ days are over—Thanks, Tracey—you’re the best!!
  • Rottweiler
    Rottweiler replied to the thread Cranks, no start..
    Do you have compression releases? If you're getting spark and gas. No compression?
  • Rottweiler
    Rottweiler reacted to Coolbreezin's post in the thread Cranks, no start. with Like Like.
    Did that. But to be sure, I'll swap the coil with another I have on the shelf. Thank you.
  • Rottweiler
    Rottweiler reacted to chubs's post in the thread Cranks, no start. with Like Like.
    You might also try a small squirt of gas from a syringe into the carb while cranking it over to help checking fuel starvation problems...
  • Rottweiler
    Rottweiler reacted to Snuffy's post in the thread Cranks, no start. with Like Like.
    It would seem if you are getting spark and fuel it should start. Check output on the starter. Maybe a weak spark. How do the plugs look...
  • Rottweiler
    Rottweiler reacted to mleach72's post in the thread Cranks, no start. with Like Like.
    Are you absolutely sure you are getting spark? Remove each plug. Then put them back into the plug wire. Hold the plug against the head...
  • Coolbreezin
    Coolbreezin replied to the thread Cranks, no start..
    Did that. But to be sure, I'll swap the coil with another I have on the shelf. Thank you.
  • Coolbreezin
    Coolbreezin replied to the thread Cranks, no start..
    Awesome idea. It's on the list. Thank you.
  • Coolbreezin
    Coolbreezin reacted to chubs's post in the thread Cranks, no start. with Like Like.
    You might also try a small squirt of gas from a syringe into the carb while cranking it over to help checking fuel starvation problems...
  • Coolbreezin
    Coolbreezin reacted to mleach72's post in the thread Cranks, no start. with Like Like.
    Are you absolutely sure you are getting spark? Remove each plug. Then put them back into the plug wire. Hold the plug against the head...
  • mleach72
    mleach72 reacted to Snuffy's post in the thread Cranks, no start. with Like Like.
    It would seem if you are getting spark and fuel it should start. Check output on the starter. Maybe a weak spark. How do the plugs look...
  • mleach72
    mleach72 replied to the thread Cranks, no start..
    Are you absolutely sure you are getting spark? Remove each plug. Then put them back into the plug wire. Hold the plug against the head...
  • MossBerg590
    MossBerg590 replied to the thread Wheel Valve Stems and Dyna Beads.
    So you prefer regular wheel weights?
Show older items
Top