Latest activity

Energy One
What's new New posts Latest activity
  • Mikeinjersey
    Mikeinjersey replied to the thread 2006 K9 117 starting issues.
    If going forward you ever suspect your buttons to be an issue use this tutorial to help diagnose.
  • Mikeinjersey
    Mikeinjersey reacted to knothead's post in the thread 2006 K9 117 starting issues with Like Like.
    Do not hit the run button when you turn the key on and see of it will.start which it should...when you are hitting the run button once...
  • Mikeinjersey
    Mikeinjersey reacted to NEOHIOK9's post in the thread 2006 K9 117 starting issues with Like Like.
    It appears that when i hit the run button the red light on the ignition module goes out and the bike will not start, When i hit the run...
  • Rottweiler
    Rottweiler reacted to Mikeinjersey's post in the thread Clutch with Like Like.
    Not likely to be related to your problem but 32oz is more than needed. I believe 20 oz is what users on this site install to help keep...
  • Rottweiler
    Rottweiler reacted to Race3119's post in the thread Clutch with Like Like.
    At this point, im going to order primary and trans fluids and hope that changing those will help it. Everything else is checking good as...
  • Rottweiler
    Rottweiler reacted to Race3119's post in the thread Clutch with Like Like.
    Update - measured the fluid that came out of primary and it is at minimum 32 oz. Which is way more than recommended....Wonder if that...
  • Rottweiler
    Rottweiler reacted to mleach72's post in the thread Clutch with Like Like.
    Just another note. When adjusting the cable, push the cable into the housing to see how much true free play you have. Before you see...
  • Rottweiler
    Rottweiler reacted to Race3119's post in the thread Clutch with Like Like.
    Pulled the primary cover off. Don't see anything crazy initially. Fluid is definitely gray..but no shavings, bearings or chunks :oldlaugh:
  • Rottweiler
    Rottweiler reacted to Race3119's post in the thread Clutch with Like Like.
    When screwing it in.. should the threaded piece it's screwing into move (outward) at all?? Because it is slightly
  • Rottweiler
    Rottweiler reacted to knothead's post in the thread Clutch with Like Like.
    Yes it would move outward and should
  • Rottweiler
    Rottweiler reacted to Snuffy's post in the thread Are these wheel bearings? with Like Like.
    I live where the people from BFE go to get away from it all. Lol. Great info tho. Thanks
  • Rottweiler
    Rottweiler reacted to Mikeinjersey's post in the thread 2006 K9 117 starting issues with Like Like.
    If your battery is old (2 years or more) get it load tested. Low batteries can cause unusual things to happen. An intermittent crank...
  • Rottweiler
    Rottweiler reacted to HMAN's post in the thread 2006 K9 117 starting issues with Like Like.
    Before you start it, crack the gas cap. Sounds like ya may have a clogged air vent in the cap. If it still has the small white plug, it...
  • Rottweiler
    Rottweiler reacted to Mikeinjersey's post in the thread Kickstand Wedge with Like Like.
    Try Mr. Wright I think he has machine shop and maybe can make what you want.
  • Rottweiler
    Rottweiler reacted to SKOGDOG's post in the thread Kickstand Wedge with Like Like.
    In need of a wedge kickstand spacer for a K9 —they were plentiful some years ago, but seem to have vanished into obscurity (along with...
Show older items
Top