Latest activity
-
I have the same pipe as you. I replaced the baffles with Big City Thunder baffles. Quite loud! I wear earplugs while riding. Sounds... -
Usually unbaffled pipes, straight, curved or short are the worst things you can put on a street riding bike. They play hell on the tune...
-
SCOTTx88 reacted to Shredder's post in the thread Replacing Rear Tire, Shinko Backordered with
Like.
i put a Shinko on my 09 bagger and it only lasted 2,500 miles, also I'm very diligent about running the proper air pressure. So never... -
Shredder replied to the thread Replacing Rear Tire, Shinko Backordered.i put a Shinko on my 09 bagger and it only lasted 2,500 miles, also I'm very diligent about running the proper air pressure. So never... -
Because you have had this problem virtually from the start, your issue is most likely a clutch failure. If your problem was in the... -
4-6 are helical cut gears which create side loading under torque. If the bearings are worn and you have mainshaft play the side loading...
-
Same here, I have been waiting all year, emailing Shinko distributer. It keeps getting delayed. I’m down to threads so bit the bullet... -
Because you have had this problem virtually from the start, your issue is most likely a clutch failure. If your problem was in the...
-
4-6 are helical cut gears which create side loading under torque. If the bearings are worn and you have mainshaft play the side loading...
-
Mikeinjersey replied to the thread 4th gear slipping.Because you have had this problem virtually from the start, your issue is most likely a clutch failure. If your problem was in the...
-
Same here, I have been waiting all year, emailing Shinko distributer. It keeps getting delayed. I’m down to threads so bit the bullet...
-
Love mine -
Jwooky replied to the thread Replacing Rear Tire, Shinko Backordered.Same here, I have been waiting all year, emailing Shinko distributer. It keeps getting delayed. I’m down to threads so bit the bullet... -
Jwooky replied to the thread 4th gear slipping.4-6 are helical cut gears which create side loading under torque. If the bearings are worn and you have mainshaft play the side loading...
-
https://www.bigdogbiker.com/threads/and-again-the-clutch.93723/