Latest activity

Energy One
  • Rottweiler
    Rottweiler reacted to 08 MUTT's post in the thread K9 Rebuild/Upgrade with Like Like.
    Looks awesome!!! Great Job!!
  • Rottweiler
    Rottweiler reacted to Mickmorris's post in the thread K9 Rebuild/Upgrade with Like Like.
    Beautiful work! :chopper: :cheers::patriot:
  • Rottweiler
    Rottweiler reacted to 82ndAirborne's post in the thread K9 Rebuild/Upgrade with Like Like.
    Made good progress today. Polished everything again after coming out of the shop for tuning, then installed both fenders. Fixed the leak...
  • Rottweiler
    Hello, 2018 K-9 VFI. Rear cylinder switches off when hot and the bike is idling. It happens after about 30 min riding. No check engine...
  • Rottweiler
    Rottweiler reacted to HMAN's post in the thread Rear cylinder switches off when hot. with Like Like.
    Wow, thats nutz. Id swap out the coil with a known good one for a test ride. That plastic can crack and can be hard to see. When it...
  • aspen874
    aspen874 replied to the thread WTB STOCK MIRRORS.
    Well, I ordered the OEM mirrors from Bigdog, but the bolts or hardware won't work. I went to Ace Hardware, the store rep and I could not...
  • flcmcya
    flcmcya replied to the thread Key Switch!.
    Mike..... thought you were supposed to remind me ...... Make sure the green wire is plugged in at least 3 times! Plugged it in and...
  • Rottweiler
    Rottweiler reacted to Mikeinjersey's post in the thread Key Switch! with Like Like.
    Not likely the cause. Take the ohm reading and make sure the pins are not backed out.
  • Mikeinjersey
    Mikeinjersey replied to the thread Key Switch!.
    Not likely the cause. Take the ohm reading and make sure the pins are not backed out.
  • Mikeinjersey
    Mikeinjersey reacted to chubs's post in the thread Key Switch! with Like Like.
    I guess it would be smarter to check for continuity between the ends of that circuit before fighting all the loops and tangles tracing...
  • flcmcya
    flcmcya replied to the thread Key Switch!.
    I packed the new EHC during installation...thought maybe I put too much in there!
  • flcmcya
    flcmcya reacted to chubs's post in the thread Key Switch! with Like Like.
    I guess it would be smarter to check for continuity between the ends of that circuit before fighting all the loops and tangles tracing...
  • flcmcya
    flcmcya reacted to Mikeinjersey's post in the thread Key Switch! with Like Like.
    First move should be an ohm reading before you spend time trying to visually find a break in the wire. Plenty of time to find the break...
  • Rottweiler
    Rottweiler reacted to Mikeinjersey's post in the thread Key Switch! with Like Like.
    First move should be an ohm reading before you spend time trying to visually find a break in the wire. Plenty of time to find the break...
  • Rottweiler
    Rottweiler reacted to flcmcya's post in the thread Key Switch! with Like Like.
    Thanks....tracing the green wire back will be my first move! The connecters look pretty grubby....may just need a good cleaning.
Top