Latest activity
-
Thank you! Yes, I see now that the wires go to the crank sensor. Turns out that when the regulator fried, it got so hot that it ended... -
Coolbreezin replied to the thread Just getting clicking when hitting start button.Years ago I had my whole bike rewired to avoid this and other BDM problems (had brain removed) . I had a marine starter ignition...
-
-
Jjeffwest5599 replied to the thread Just getting clicking when hitting start button.Yes. I believe so. Yellow box in the bottom and these two small boxes above it with ignition controller.
-
Rottweiler replied to the thread Just getting clicking when hitting start button.What controller do you have? Is it a stock EHC? -
Jjeffwest5599 replied to the thread Just getting clicking when hitting start button.Could I also just splice a wire from the green wire in to the starter leaving it going into the box but a wire also going to starter to...
-
J2006 k9. When I turn it in and hit the start button on the controls it just gives a loud click with the headlight going off and then...
-
ChopperJeff replied to the thread Wire near regulator, what is it?.Thank you! Yes, I see now that the wires go to the crank sensor. Turns out that when the regulator fried, it got so hot that it ended... -
Shinko is as good and probably better than the other two, not even taking price into consideration. But when you can buy 2 Shinko for...
-
Sooooo…. Ya could do what I did and get rid of all the EHC bs and hard wire ur bike and never have to worry about what every big dog...
-
Rottweiler reacted to bigkelk9's post in the thread Just cleaned up the bikes…. Time to ride with
Like.
Hey brother, I hit up Shannon and haven’t heard back, gimme the details on the meet up in June via pm if ya don’t mind -
https://www.bigdogbiker.com/threads/june-gathering-in-missouri.91848/
-
I'm planning to send this to a machine shop in Kentucky. I bought the Accutronix Tribal Grips as a guide for what I want. The Big Dog...
-
Curtis sells the same item in his kit so I sent him a message. He said it goes on the Transmission Pully Cover to protect the side cover.
