WTB: Mainshaft Sprocket/Pulley Locknut Socket

[Drewv1]

I know this is a longshot but does anyone have an extra one of these they can part with or know where I can find a good price on one.

 

[alhall88]

I ended up just picking a socket up at sears, but had to buy a 3/4 drive because thats all they had.

 

[BrianLo]

Ditto, should have seen the look on the sales guys face when I asked if he had a 3/4 to 1/2 adapter since I needed to use it on my impact wrench

 

[Drewv1]

I've been to Sears but didn't see anything deep enough to go over the shaft. Did you find it in the store or online?

 

[BrianLo]

Damn, sorry 'bout that, i was referring to a socket for the front drive pulley :loony: Gonna have to lay off of the Jack before I pickle what little brain I have left..

 

[alhall88]

My bad, I was thinking the basket nut. That thing is expensive, maybe you could rent one from a shop.
https://www.phatperformanceparts.com/ProductDetails.asp?ProductCode=3802-0003

check this out it shows what your doing
Brakes and More Article

 

[hoat]

I got the same one that Alhall88 mentions off ebay for 111 delivered but I do not see one on there now

 

[Gas Man]

Harbor frieght around you?

 

[Drewv1]

Harbor frieght around you?

Yeh, one right down the street. Didn't think they would have something like this but I'll give it a shot.

 

[Drewv1]

I found one on sale at Howard's Hog Horns for $60 plus shipping. Here is the web site if anyone else has a need for this tool. Sales ends in two weeks and he has about 18 left.

Howard's Horns Home Page, motorcycle air horns, battery cables
Scroll down the page about half way and you'll find it.

 

[lee]

if you can weld you should be able to make one

 

[Moespeeds]

You can just cut the top off the appropriately sized socket, and have the bottom half welded to one end of a pipe, and the other welded to the other end of a pipe. You can do the cutting with a cutoff wheel, and take it to a machine shop or muffler shop to have it welded. $60 is cheap though for a new one. I use a big adjustable wrench for mine.