Locodriver999
New Member
What is this part ? I am looking for the starter relay on a 2004 chopper that was rewired…
Whati
- Thread starter Locodriver999
- Start date
Locodriver999
New Member
The bottom plastic part in the picture? Thank you
Mikeinjersey
Well-Known Member
Welcome from NJ
Looks like an EHC replacement https://shop.bigdogisback.com/big-dog-parts-accessories/
Locodriver999
New Member
Thank you it is a replacement just done in December before I bought the chopper ,I would like to know what the last piece on the bottom of the picture is? I am having trouble with starting the bike from the start switch on the right side handle bar . It will start by pushing the button on the starter it self…again thanks for any help….Ron
Mikeinjersey
Well-Known Member
I'm not certain but give BDisback a call and they will know for sure. I think it's an electronic hold switch. The original EHC did not have that part on the bike.
Your starting issue is common and may be the right side switch circuit brd. especially since you have a new EHC because that was a common failure for the EHC as well.
PCB Switches & Hardware
For Fitment on Big Dog Motorcycles, PCB Switches & Hardware for all 04-11 Big Dog's
www.bigdogpartskingpin.com
Locodriver999
New Member
Thankyou
Locodriver999
New Member
I will check tomorrow thank you for the help..I'm not certain but give BDisback a call and they will know for sure. I think it's an electronic hold switch. The original EHC did not have that part on the bike.
Your starting issue is common and may be the right side switch circuit brd. especially since you have a new EHC because that was a common failure for the EHC as well.
This is a video on how to troubleshoot the brd.PCB Switches & Hardware
For Fitment on Big Dog Motorcycles, PCB Switches & Hardware for all 04-11 Big Dog's
Mikeinjersey
Well-Known Member
You will need these files for your bike: https://www.dropbox.com/s/8xnp8633t29wgs2/04 BDM Service Manual.zip?dl=0