What fork tubes do I need??

[Svahna]

Please help. I need to change my lower forktubes.

Can anyone please tell me whitch ones I need and were to find
it. I´ve been looking at BDM web site and just cant understand what I need.

Also plz understand I´m having some trouble with the language
sins I´m Swedish....

Please guys help me and please do it fast I need them asap

The bike is a 2006 Ridgeback

>Jimmy

 

[Little-Boo]

Go the Big Dog Performance Parts

2006 – 2007 Front Fork Assembly – K9 | BDM Performance Products

K9 are all the same from 2006 to 2011

You need the whole assembly part no 132-000006-01 and 132-000007-01 the cost $481 each. or Call them and tell them what you need they will ship it to you.

Carlos

 

[Svahna]

Thank you Carlos, but my bike is a Ridgeback.
And I dont need the hole assy just the tubes and ofcourse seals.

>Jimmy

 

[Little-Boo]

Thank you Carlos, but my bike is a Ridgeback.
And I dont need the hole assy just the tubes and ofcourse seals.

>Jimmy

I guess the best thing to do is call them at (316) 267-9121

Ask them for the Lower legs or Slides (left and right) and the seals which are all the same 41MM.

Hope that helps.

Carlos

 

[woodbutcher]

you will probably also need the bushings.

 

[Svahna]

Bushings huh?
Anything else?

Anyone know of sombody else selling these but BDM ?

>Jimmy

 

[Moespeeds]

Custom Chrome carries fork tubes, 41mm is the standard. Just measure your old tubes and order the same size. If you need the "lowers" then you will have to get them from BD unless you want to start screwing around fitting the fender and caliper to an aftermarket set.

 

[Svahna]

So is the seals and bushings standard part or did BigDog use some special stuff?

>Jimmy

 

[mcgroom]

Seals and bushings are standard.

If you get me the length you need, I can work on some pricing for you on the legs, etc.

Here to help if you need.