starters

Energy One
Daddycool

Daddycool

Active Member
I am pretty sure my starter has gone South and I was wondering if anyone knows who is rebuilding these OEM starters. Also was wondering if anyone has a Spyke on there 05 chopper and if they have any issues?
 
K

Keith9397

New Member
Try Todd at 904-262-2453 he has rebuilt units on the shelf for 199.00 he will ship it to you put your old one in the box and use the shipping lable to send it back.
 
Coolbreezin

Coolbreezin

Active Member
My jackshaft broke recently. BDM sells thier starters for around $400, with jackshaft. Ive already had 9 starters. My tenth will be a Spyke, also around $400. Completely rebuildable, including the jackshaft. Once installed, I'll post my feelings about my desicion. But I've heard wonderful stories about these starters and the company, so I expect no problems.



Coolbreezin :flag:
Member of The Patriot Guard Riders.
Member of ABATE Duval (Florida).
Associated with The POW/MIA Foundation of Jacksonville.
Volunteer at City Mission Center – Jacksonville, FL

Knowledge is Power!
Http:\\BigBikeJaxSucks.com
 
Stinky7-11

Stinky7-11

Member
Spyke

I called Spyke today and they said they don't make a starter to fit the Baker DSSC but Tech Cycle Performance does, it looks like good stuff..
Stinky
 
Coolbreezin

Coolbreezin

Active Member
Hey thanks Stinky. I appreciate that info. I found out late this afternoon that your right. Ive been in contact with J&P Cycles to get a starter, so we'll see. Well...heading off to Tech Cycle Performance Products.
Thanks again.


Coolbreezin :flag:
Member of The Patriot Guard Riders.
Member of ABATE Duval (Florida).
Associated with The POW/MIA Foundation of Jacksonville.
Volunteer at City Mission Center – Jacksonville, FL

Knowledge is Power!
Http:\\BigBikeJaxSucks.com
 
H

hollywoodjohnny

Banned
I also broke my shaft about a yr. ago, spike would'nt rebuild it becouse its a big dog, big dog jacked me around trying to get $400 outa me, so my buddy swapped his spike head for my BD and they rebuilt it for around $150-$200 works great.
:cheers:
 
mcgroom

mcgroom

Well-Known Member
Guys, I can get the Baker Fire Starter and I talked to Tech Cycle 2 weeks ago about getting set up with them.

If I can help you all out, let me know and I will see what kinda of pricing I can get worked out for you.
 
Gabriel

Gabriel

Active Member
A friend has a Spyke on his 107 and has had no problems since the install. He had all kinds of problems before buying a Spyke.

I just installed the S&S compression releases and what a difference, I really think this is the answer to all the starter problems...
 
Coolbreezin

Coolbreezin

Active Member
My 9 starters were based on a poorly milled inner primary case, causing the jackshaft to move slightly. Plus, the crap starters they pushed on us for a few years (inner seal leaks). So here I am...#10. Thanks for asking though.



Coolbreezin :flag:
Member of The Patriot Guard Riders.
Member of ABATE Duval (Florida).
Associated with The POW/MIA Foundation of Jacksonville.
Volunteer at City Mission Center – Jacksonville, FL

Knowledge is Power!
Http:\\BigBikeJaxSucks.com
 
Five Five

Five Five

Well-Known Member
Gabriel said:
I just installed the S&S compression releases and what a difference, I really think this is the answer to all the starter problems...
Click to expand...
Gabriel...thats my next project for my scoot...I may P/M if I run into any problems..
 
Five Five

Five Five

Well-Known Member
Coolbreezin said:
My 9 starters were based on a poorly milled inner primary case, causing the jackshaft to move slightly. Plus, the crap starters they pushed on us for a few years (inner seal leaks). So here I am...#10. Thanks for asking though.



Coolbreezin :flag:
Member of The Patriot Guard Riders.
Member of ABATE Duval (Florida).
Associated with The POW/MIA Foundation of Jacksonville.
Volunteer at City Mission Center – Jacksonville, FL

Knowledge is Power!
Http:\\BigBikeJaxSucks.com
Click to expand...
Thanks Coolbrezin....good to learn these things...
 
Stinky7-11

Stinky7-11

Member
Tech

I called Tech Cycle Performance, they said the 1.4kw would be perfect as long as you you have compression release, it's $495. They do have a 2kw but he talked me out of it, it was $595.
 
mcgroom

mcgroom

Well-Known Member
Stinky7-11 said:
I called Tech Cycle Performance, they said the 1.4kw would be perfect as long as you you have compression release, it's $495. They do have a 2kw but he talked me out of it, it was $595.
Click to expand...
I will call tomorrow about setting up with them.

PM me if your looking for pricing. :2thumbs:

Mick
 
Coolbreezin

Coolbreezin

Active Member
As soon as I read that Baker carried starters for the Dogs, I sent an email inquiring. This is the reply I received.
Pete,

The information on the thread is incorrect. We do not offer a starter to fit the 2005+ Big Dog Motorcycles.
Regards,
Scott Lerg
BAKER Drivetrain
9804 E. Saginaw
Haslett, MI 48840
Toll Free 1-877-640-2004
Phone 517-339-3835
Fax 517-339-4590

Sorry guys. But now we know.

Coolbreezin :flag:
Member of The Patriot Guard Riders.
Member of ABATE Duval (Florida).
Associated with The POW/MIA Foundation of Jacksonville.
Volunteer at City Mission Center – Jacksonville, FL

Knowledge is Power!
Http:\\BigBikeJaxSucks.com
 
You must log in or register to reply here.
Top