Stainless Steel Header Wrap Ties
- Thread starter LDO
- Start date
pisssed
pisssed
http://www.sjdiscounttools.com/kd3191.html
If im thinking right this is the tool any auto part store should have it
If im thinking right this is the tool any auto part store should have it
I could of used one of these on mine but couldn't get them tight enough so ended up using radiator clamps.
http://www.tecratools.com/product571.html
http://www.tecratools.com/product571.html
alhall88
UAW
LDO, I've tried to use about 3 different types of those stainless ties and always had the same problem. When the pipe heats up those ties expand and either break or get loose. I've never had a problem when a good stainless hose clamp. If your spraying the header wrap with the black thermal coat just spray the hose clamps as well and you will barely notice them.
Sorry Gas,
you are absolutely right!
Took a ride out to the 'Hideout'. Come to find out it was closed but had a good time getting there! Stopped along the way and took a few pics. Here you go. This was the first ride on the Thug. I remember you wanting the pipes wrapped in black Gas so Enjoy!!
Gratuitous self pic!
you are absolutely right!
Took a ride out to the 'Hideout'. Come to find out it was closed but had a good time getting there! Stopped along the way and took a few pics. Here you go. This was the first ride on the Thug. I remember you wanting the pipes wrapped in black Gas so Enjoy!!
Gratuitous self pic!
Looks awesome!
That would be pretty cool.
Thanks Ray,
Here's a quick before and after pic.
The before pic does have V&H Short Shot Staggered pipes and a sissy bar/bag. Oh yeah, drag bars too.
BEFORE:
AFTER:
Also, the entire build can be reached (i think) by the link at the bottom of my posts here.
Sorry to stray from the typical Big Dog stuff fellas. Thanks for accomodating me.:2thumbs:
