Speedometer not reading

[Wokie]

Hello fellow dog owners, My problem is i have just put a wire plus kit in my 04 chopper. went for a ride about 50 miles and everthing was working. Next day no speedometer reading. just reads zero so has power. i then replaced the speed senser and still just reads Zero. Any ideas or help would be much appreciated, Happy and safe riding!

 

[migai082681]

Same thing is happing to my 08 ridgeback. After the wire plus install all worked fine. 2 days later out for ride and speedo fall to zero. No mileage no speedo all the lights work and still dose a self check. Have check the plug under the gas tank, the wiring from the wire plus but nothing. I checked the power and ground on the seed sensor all good.

 

[Wokie]

I contacted wire plus and they said to check the gap adjustment on the speed sesor. Does anybody no what this is or how to do this? Cheers

 

[Mr. Wright]

I've looked thru the form and internet and can't find anything. My speedo is doing the same thing, and I don't have wire plus or an EHC. Has anybody else ever heard of an adjustment on the sensor?

 

[BigDogBro1]

Proximity sensors normally do require some sort of air gap setting and have a maximum distance that they will work for the max frequency they are intended for.

I would check for the signal coming into the Wire+. If the sensor is a two wire then most likely it's an AC/sinusoidal type signal....not DC. If you can visually see the sensor air gap distance you could close the gap a bit to test that idea.

 

[migai082681]

I don't think there is a way to adjust the game of the speed sensor

 

[Jwooky]

Sounds like something they would say.

So clueless

 

[Bobby Schulz]

No adjustment on the dogs speedo sensor. It works or dosent.