sissy bar question

[Hammitt]

I have acquired my best friends 06 K9, it has a passenger pad and
a 300 rear tire. He passed away and I got it to keep it from being repo'ed.
My question is I need a sissy bar for the bike. I noticed Ginz Choppers sells them but they list it for 07 and up. I have the struts on the bike.
Was looking for a bar that would not cost a fortune.
I have a 04 chopper with a bar and my wife loves to ride it but she is not comfortable on the 06 with no bar.
Any help would be greatly appreciated.

 

[Knuckles]

You need the struts with holes to accept the sissy bar. Going to cost you a lot of $ IF you can find them. Try Bigdogpartsking on ebay

 

[KnotSo]

Contact Curtis @ Wild Steed Worx and see if he can help you:
http://www.wildsteedworx.com/

 

[Hammitt]

Thanks for the input.
I do have the struts that accept the sissy bar.

 

[Twisted]

Check with Bigdogpartsking and keep an eye on ebay, have seen a few on there for the 300mm tire. Or you can just make one yourself or find a local fabricator to built you one in stainless or have it built and chromed.

 

[KaptinAmerika]

Derek and Donna don't have any yet.

 

[francoblay1]

here is a 18" one: http://www.bigdogbiker.com/forums/swap-meet/69930-fs-24-sissy-bar-300-rear-tire.html

 

[Viking]

Pretty simple to bend one yourself if you want to save $$$. The after market ones are $$ and the original ones are $$$$$$$ on a scale to $$$$.

 

[billybud]

i have one for you . Just removed from my 06 K9 . like new condition .

 

[billybud]

i have one for you . Just removed from my 06 K9 . like new condition .

 

[Savatage]

Billybud,

Still have the sissy bar?
What are you asking?
With and/or without the pad. (my seat is black)

 

[BBChopper]

Pretty simple to bend one yourself if you want to save $$$. The after market ones are $$ and the original ones are $$$$$$$ on a scale to $$$$.

Have fun drilling and taping the holes in the rod!

 

[francoblay1]