shifting arm?

[mml03102]

Hi, I just took my forward controls off , got banged up and bent in the accident , I need a new arm and peg and also the part that goes through the arm housing that bolts from the backside and has the foot peg clevis on the front, I have no idea what the call that part nor do I know how to get it out ?

 

[HMAN]

Can you post up some pics? Might make it a bit easier to see what you need.

 

[mml03102]

Good idea , for some reason thas the only picture it will let me post, that bold and washer aren't suppose to be there , I forgot to take them out for the picture,

 

[BWG56]

 

[mml03102]

Thanks!

 

[Little-Boo]

Hi, I just took my forward controls off , got banged up and bent in the accident , I need a new arm and peg and also the part that goes through the arm housing that bolts from the backside and has the foot peg clevis on the front, I have no idea what the call that part nor do I know how to get it out ?

I have compete left side forward control (a new like condition), Housing, Shift Peg, Foot Peg and Shift Arm. When I say new like condition I mean it was used for about two weeks or so. I have it both ways extended (2 1/2) or Stock location. If you want the whole thing PM me with an offer and will go from there. Sorry but I won't separate the parts.

Carlos

 

[leandean99]

mml03102

what r u going to do with the bent control, I could use it for parts for my heel toe shifter, I cut the arm off anyway. pm me if u want to get rid of it, thanks.

 

[mml03102]

I got it apart the clevis was hard to get off it must have been damaged in the fall.