Shift linkage into transmission Paw broke off. Now what?

Energy One
Iggy

Iggy

Member
I can't find the pic but the part that goes into Transmission Pawl. Now I have the part, how do I go about this? It snapped off flush.
 
HMAN

HMAN

I just like my Freedom
Iggy said:
I can't find the pic but the part that goes into Transmission Pawl. Now I have the part, how do I go about this? It snapped off flush.
Click to expand...
Well, you are gonna have to start with pulling the primary. Then the trans has to be broken down to an empty case. The shifter pawl is the LAST thing to come out. The pawl on mine broke the weld. There is a good video on Youtube showing how the Baker is torn down. Lookup Baker Drivetrain on YT. This is a good time to replace the bearing too

20220811_163128.jpg20220811_163915.jpg20220728_154701.jpg
 
Last edited:
Iggy

Iggy

Member
HMAN said:
Well, you are gonna have to start with pulling the primary. Then the trans has to be broken down to an empty case. The shifter pawl is the LAST thing to come out. The pawl on mine broke the weld. There is a good video on Youtube showing how the Baker is torn down. Lookup Baker Drivetrain on YT. This is a good time to replace the bearing too

View attachment 114161View attachment 114162View attachment 114182
Click to expand...
Thanks much! Also, anyone that can provide a link would be appreciated. Transmisson has been sent back to Baker twice. Now you know why I want to do myself. Thanks in advance fellow Big Dog riders/tech/mechanic's !
 
Iggy

Iggy

Member
Iggy said:
Thanks much! Also, anyone that can provide a link would be appreciated. Transmisson has been sent back to Baker twice. Now you know why I want to do myself. Thanks in advance fellow Big Dog riders/tech/mechanic's !
Click to expand...
Thank You! Jack Errigo
 
You must log in or register to reply here.
Top