Primary drain plug

[John Cingel]

so I went to change my primary fluid and some one trashed the plug to the point I need to use a easy out to get it out. So I haven't taken it out yet until I can find a replacement. So there is my question. Anyone know where to get a replacement?

 

[HMAN]

Harbor Freight has an assortment box for like 6 bucks. You may wanna use some Green Threadlocker too. It fills in and locks for larger gaps. Use the primer as well for best results.

 

[JeffM]

Curtis has them

 

[Big D Florida]

Any harley shop will ha e them with the o-ring and the magnet

Even better...

 

[PROFLYER]

curtis has them at wildsteedworx.com and as long as you're taking the cover off you should get a new gasket from him as they've been updated

 

[BWG56]

curtis has them at wildsteedworx.com and as long as you're taking the cover off you should get a new gasket from him as they've been updated

He's gonna need the inspection cover gasket, but I have used the original primary cover o-ring/gasket many times without replacing it. You can also order them from Baker.

 

[PROFLYER]

He's gonna need the inspection cover gasket, but I have used the original primary cover o-ring/gasket many times without replacing it. You can also order them from Baker.

yeah might as well get that too. The new one is square not round. They are reusable but I'm betting he's got an old one in there.

 

[whitewolf01]

Try using a torx bit a bit larger than the hogged out hex. Tap it in with a hammer. It should screw out.