"Positronic Industries" brand main harness for 04 Chopper??

awg

Guru
I bought a backbone harness off Ebay a while back. It wasn't the right one for my 04 RT Chopper. Been sitting in the garage. Bought it from the same people you did on Ebay. Not sure from the picture if its the same thing I got. I ended up with a wire plus. If you can send me a pic of yours I will check it to see if its what I have.
 

Th3InfamousI

Administrator
Staff member
Why replace the entire main harness? Solder in a new wire for just the tach & Speedo. How do you know its shorted out did you stick a multimeter on it?


On another note about what you bought:

I had bought the same one after I did my WP install. I wanted to go back when I had some time and clean it all up after knowing what I know now after completing the install.

I'll probably just post it up for free in the forum hopefully someone can use it not sure what bike it goes to though.
 

Raywood

The Pirate
Staff member
Calendar Participant
Troop Supporter
I have replaced many parts of my wiring harnes that have frayed and worn over the years. Make it better than it was before. And its kind of fun. And I replace the JST connectors with Deuche plugs each time. They are way better but a bit bigger. :)
 
I have replaced many parts of my wiring harnes that have frayed and worn over the years. Make it better than it was before. And its kind of fun. And I replace the JST connectors with Deuche plugs each time. They are way better but a bit bigger. :)
Anybody know where to find the jst connectors? Besides big dog performance parts. I had a connector break last night while I was re wiring the bike.

I have looked all over the net, radio shack, hobby world, just need the female connector that connects to the right handle bar wiring harness.
 

Th3InfamousI

Administrator
Staff member
Anybody know where to find the jst connectors? Besides big dog performance parts. I had a connector break last night while I was re wiring the bike.

I have looked all over the net, radio shack, hobby world, just need the female connector that connects to the right handle bar wiring harness.
Dikikey.com - They got everything you need a fast shipping :flag:

Big Dog used the JST - JWPF model which is water resistant

Below is for a parts list:
http://www.digikey.com/PTM/PTMPartList.page?site=us&lang=en&ptm=11101
 
Top