Motorcycle scissor jack

[Mickeetwo]

I'm looking for a motorcycle scissor jack. Anybody know were to find a good deal on one. I like the way the scissor jacks are smaller and slide under the frames easy. I already have a craftsman jack. I want one like this K&L Fat Jack Center Jack - Cruiser Motorcycle - Motorcycle Superstore Just don't want to pay $275.oo for one. Group buy maybe

 

[Gatlin5]

I Purchased this one at Nothern Tool on sale a couple of weeks ago for $69, it is normally $89. Much stronger looking than the picture and works great, those little stands slide right off. I put a piece of rubber shop matt on it. Rated at 1100 lbs.
Torin Jacks Lift Table — 1100-Lb. Capacity, Model# TRE4101 | Motorcycle Stands | Northern Tool + Equipment

 

[gordon]

this is not a scissors jack but this is what i have and it fits under the Dog

OTC 1545 Stinger Motorcycle Lift | Jacks and Lifts

 

[Mickeetwo]

this is not a scissors jack but this is what i have and it fits under the Dog

OTC 1545 Stinger Motorcycle Lift | Jacks and Lifts

Already have something like that.....was wanting a scissor jack because its smaller and easier to move around.

 

[V]

I Purchased this one at Nothern Tool on sale a couple of weeks ago for $69, it is normally $89. Much stronger looking than the picture and works great, those little stands slide right off. I put a piece of rubber shop matt on it. Rated at 1100 lbs.
Torin Jacks Lift Table — 1100-Lb. Capacity, Model# TRE4101 | Motorcycle Stands | Northern Tool + Equipment

Thats a good deal! I have one similar that came with the bike lift. And they do fit under our lower clearance bikes with ease.

 

[ChiefB]

Try this website. Motorcycle Lift

 

[BigDogBro1]

I Purchased this one at Nothern Tool on sale a couple of weeks ago for $69, it is normally $89. Much stronger looking than the picture and works great, those little stands slide right off. I put a piece of rubber shop matt on it. Rated at 1100 lbs.
Torin Jacks Lift Table — 1100-Lb. Capacity, Model# TRE4101 | Motorcycle Stands | Northern Tool + Equipment

What is the lowest this jack will go measured from the flat top surface?

4 inches is to high for my dog.

 

[Nakashianr]

this is not a scissors jack but this is what i have and it fits under the Dog

OTC 1545 Stinger Motorcycle Lift | Jacks and Lifts

Check out the description, someone doesn't know that a ton is 2,000 lbs not 1,000 lbs.

 

[ChiefB]

FYI, the Blackjack lowered height is 3 1/2 inches.

 

[V]

FYI, the Blackjack lowered height is 3 1/2 inches.

Yes it is. Fits under the Ridgeback with a bit of room to spare.

 

[Mickeetwo]

The Blackjack and Torin is more in my price range. $69.oo is a good deal on the Torin jack.

 

[Mickeetwo]

What is the lowest the Torin jack will go measured from the flat top surface?

 

[Gatlin5]

What is the lowest the Torin jack will go measured from the flat top surface?

Just went out to the garage and measured it for you. This is with out the slide on post.

Lowest: 3- 7/8"
Highest: 14- 7/8"

Unit is 6" wide by 18- 1/4" long

And honestly it looks much more stout than the picture in the Online catalog.

Good Hunting.

 

[jimizee028]

The Blackjack looks much more stabil than any of the other ones...

 

[wyatt580]

I use the blackjack. After every ride I pull in on the lift. slide the black jack under and clamp the front tire. Only use kickstand when out. Like V said it goes under easy..

 

[Mickeetwo]

Just went out to the garage and measured it for you. This is with out the slide on post.

Lowest: 3- 7/8"
Highest: 14- 7/8"

Unit is 6" wide by 18- 1/4" long

And honestly it looks much more stout than the picture in the Online catalog.

Good Hunting.

Thanks Gatlin for checking the height. The 3-7/8" may be to high. My K9 clearence is just under 4"