MANUAL................

[jimizee028]

I know this has been said before and people are opinionated about it but i just recieved my big dog manual for my bike through nelson and let me tell you even know i do everything to my bike on my own , and am mechanically inclined,this is a must have ,very valuble peice of knowledge to own....i grew up in the 60s and 70s so it seems as though environmentally things were in the air that sorta stopped and slowed down growth of the brain cells ,so it is so nice to have a reference guide to fall back on to when workin on the bike:2thumbs: :up:

 

[DRBarnhart]

It would really be the shit if it had the part numbers too!!!!

Dennis

 

[Raywood]

For all here. Add to it the S&S SSW+ motor manual and the Baker Transmission file and you will have a hell of a service manual.

:2thumbs:

 

[Bmarchant]

Hey Ray,
You mentioned the Baker Transmission file. Would you happen to know what Baker Transmission is on the 03 choppers. I've got the S&S manual for my engine, and the S&S file for the carb. Just need the shop manual and this baker transmission file and I'm good to go...... Thanks for all the help Ray.

BMarchant

 

[Raywood]

Hey Ray,
You mentioned the Baker Transmission file. Would you happen to know what Baker Transmission is on the 03 choppers. I've got the S&S manual for my engine, and the S&S file for the carb. Just need the shop manual and this baker transmission file and I'm good to go...... Thanks for all the help Ray.

BMarchant

OD6 LSD Baker
I didn't check on the site to see if the file/manual supported the OD6 but I'll check it out today.

 

[BigDogBro1]

It may have some good info and pretty pictures, but it's far from being a complete service manual. Not even any OIL CHANGE info. I was very disappointed!!! for the $115.00 spent.

 

[Raywood]

Hey Ray,
You mentioned the Baker Transmission file. Would you happen to know what Baker Transmission is on the 03 choppers. I've got the S&S manual for my engine, and the S&S file for the carb. Just need the shop manual and this baker transmission file and I'm good to go...... Thanks for all the help Ray.

BMarchant

Found it here. Not a bad .pdf file to have in your manual.

http://www.bakerdrivetrain.com/od6/od6_instructions_v2_04-08.pdf

 

[BigDogBro1]

Thanks Raywood!

That's a manual worth the paper it's printed on! A keeper.