Looking for an open primary cover

[ess286]

I bought an 03 Chopper that has a Hitech, 4" open primary. The outer cover has a skull and flames design. Well I had to move the controls back to stock length because I am short and the skull now gets in the way of my foot. To switch gears I have to sit pidgeon toed on the bike to get my toe under the shifter. I am looking for a Hitech cover that is normal size and wiont bankrupt me

 

[ess286]

For the record I took this pic before I moved the controls back


img7.imageshack.us/i/primaryb.jpg/]

[/URL]

 

[alhall88]

Hitech uses there own bolt pattern so your screwed. You will have to buy from them or have one custom machined using your old one as a template.

 

[Trainguy]

I would look at fabricating a bracket to mount the controls to (between the frame and the controls). Bring the controls up not out a reasonable amount without causing alot of misalignment on the shift linkage. Would be a lot cheaper than a new or different OBS:2thumbs:

 

[hollywoodjohnny]

f-okie just turned me on to this company you might want to check them out
Mike is the contact guy there
Chesapeake performance