lifts

[ukkid]

Would like to know if anyone has used a bike lift from Harbor Freight on a BD Coyote and if it works ok? thanks

 

[Chong]

I think Mr Wright uses one he made mods too.

 

[dtmmil]

I use one with my bulldog and theres room to spare.

 

[john sachs]

This is the 1 I use. IMO, the best of the best. Both side pieces are removed quickly.
John
John

 

[41bigdawg]

I use the MT1500X from APlusLift, one of the best tools I have ever bought and it has the custom made ramp courtesy of "Second Chance Customs" @knothead.

 

[knothead]

I use the MT1500X from APlusLift, one of the best tools I have ever bought and it has the custom made ramp courtesy of "Second Chance Customs" @knothead.

View attachment 119991

Looking good

 

[Mickmorris]

I use the MT1500X from APlusLift, one of the best tools I have ever bought and it has the custom made ramp courtesy of "Second Chance Customs" @knothead.

View attachment 119991

Nice looking setup Robert! Hope you’re doing great!

 

[ukkid]

I'm sorry...my question was more about the roll under hydraulic jack type lift

 

[41bigdawg]

Oooops....well at least we got to show off a little

 

[Chong]

I use the HF .. works fine for me.
Usually have to put front tire on a 2x6 laid flat to get jack under bike.

 

[Jwooky]

Yes, I have my Mastiff on one

 

[41bigdawg]

I have a Pitbull lift that I would sell ya if you are interested?

 

[Mickmorris]

I use one with my bulldog and theres room to spare.

No those little ones from Harbor freight are kinda junkie. I had one & gave it away. I have a OTC motorcycle lift and it works great!

 

[dtmmil]

No those little ones from Harbor freight are kinda junkie. I had one & gave it away. I have a OTC motorcycle lift and it works great!View attachment 120000

I have the red lift table not the jack like that. I have a crapsman lift jack, junk, first one broke during assembly, this one doesnt hold anything level.

 

[Mastiff Rider64]

Would like to know if anyone has used a bike lift from Harbor Freight on a BD Coyote and if it works ok? thanks

Do you mean like the jack lift or the table lift? I have both and use them on my 06 Mastiff and 09 Bulldog Bagger. I had to modify the table lift a little to make it more convenient, but the jack lift the only issue I have is I have to put a 1x6 under the rear tire to have the clearance for the Mastiff but it wont fit under my bulldog (even using the 1x6 trick)

 

[ukkid]

Do you mean like the jack lift or the table lift? I have both and use them on my 06 Mastiff and 09 Bulldog Bagger. I had to modify the table lift a little to make it more convenient, but the jack lift the only issue I have is I have to put a 1x6 under the rear tire to have the clearance for the Mastiff but it wont fit under my bulldog (even using the 1x6 trick)
[/QU The jack lift...can you roll the bike around on it safely?

 

[chubs]

Where are you located in Indiana, if I may ask?

 

[Mastiff Rider64]

I normally don't try to roll it around cause a zip tie can stop a wheel instantly. I usually park the bike jack it up do my work and then let it back down. But if you keep your floor clean then I don't see why you couldn't move it around, but I personally wouldn't try it cause I'd be to worried of the bike falling over....

 

[HMAN]

I started with the HF red move around lift for the Pitbull. I had to build a small ramp for the front end so the jack would fit (4inch clearence). I could roll it around IF I was Really careful. I had the bike strapped to the lift as well.