Left Side Switches INOP

[Loafington]

The left turn switch, hi/low beam and horn are all inop.
There are a total of 18 LED's on my EHC. Starting from the back of Connector B, moving from left to right, first row is an amber LED then a red one. Second row, moving from left to right is an amber LED, then a green LED. With the key on, the amber LED in the second row is on steady and the green LED next to it, is flashing. No other LED's are on at this point. The LED in row 7 is not on, it is just reflecting light from the camera.

Any suggestions?

 

[N8KAM]

The two lights that are on is normal...
Left switch might have come unplugged or is faulty.. pull it apart and check.:up:
I have heard that they had some issues with the switches in 05-06..

 

[Raywood]

Could be as simple as the connector inside the control pulled out. Have you had the handle apart lately? The little connector is difficult to slide on and I find using a pair of needle nose works well. Ensure there is a good supply of die electric grease in there.
If that's not the problem then check the connector under the tank. It may have pulled apart.

Good luck,
Ray

 

[Gas Man]

Also check the wiring under the tank.

And here's what you should have for that control