Here's the pics I said I would post of how I connected my running light/turn signals.....In this pic you can see I have added the jst connectors to my lights, each is individually covered in shrink tubing then in one bigger tube.
View attachment 50179
This is the stock BDM connector, don't have any idea what it's called, but this is it.
View attachment 50180
Slide the 1/2" shrink tubing over the jst connectors first.
View attachment 50181
Then plug them in.
View attachment 50182 Now slide the tubing over the connection, be sure to check that the lights are working correctly before you shrink the tubing.
View attachment 50183
Now get you heat gun and shrink the tube, this is the finished product, now push it in the housing and your done!
View attachment 50184 View attachment 50185 View attachment 50186
Took the bike out this evening with the new lights and loved them, I highly recommend these!
