Just installed my Dual Runner

[kmalysa]

Just installed my new S&S Dual Runner Intake
Easy install, can't test it yet cause I have the Primary cover off waiting for new o ring

Two small complaints:
1: Enricher included in kit is eitther full on or off. In NE Ohio on cold days it's a must to have, but I usually start full on and immediatelt close down to apprx 30%. This one looks like it will be a plug fowler for sure.
2: Hose clamps and filters themselves look cheap as compared to the pretty 2 into 1 Intake.

Thanks Mick for hookin me up (Pic attached)
Ken

 

[Nukeranger]

What about riding in the rain? Do they come with rain covers? I ride in the rain so this is a must for me.

 

[kmalysa]

Yes I bought two black rain socks made to fit

 

[Nukeranger]

Thanks, one more question. Is your knee pushed out farther from the carb or closer in than the stock BDM filter?
Thanks in advance,

Huw

 

[kmalysa]

Don't know yet cause it's still up on the lift. But doesn't look like it will interfer much

 

[Billy the kid]

:2thumbs: Looks great.

 

[Brew]

It looks great...:2thumbs:

 

[mcgroom]

Looks great. Glad we could help you out.

 

[Chris04Masitff]

coooool!

 

[RCAdd1ct]

Put heat shrink tubing on the clamps to hide them in plain sight.

 

[lee]

looks good. I don't understand what you're saying about the enrichener though - that's on the carb, not the intake

 

[mcgroom]

The original enrichener handle is mounted to the backing plate of the stock air cleaner. That gets replaced and a new enrichener pull-up gets instslled directly on the carb body.

 

[erldawg]

Thanks, one more question. Is your knee pushed out farther from the carb or closer in than the stock BDM filter?
Thanks in advance,

Huw

I didn't see any noticable difference after installing the Dual Runner.

 

[king scott]

I like it

 

[bryant1609]

Thanks, one more question. Is your knee pushed out farther from the carb or closer in than the stock BDM filter?
Thanks in advance,

Huw

I just put mind on Friday and rode Saturday and Sunday with it. It replaced a D&M Spike, which my leg touch near the knee. The Dual Runner doesn't stick out that far that my leg doesn't even touch it while riding.

 

[Tattooedirish1]

Put heat shrink tubing on the clamps to hide them in plain sight.

Good tip!!

 

[kmalysa]

looks good. I don't understand what you're saying about the enrichener though - that's on the carb, not the intake

You have to remove the enricher lever and install a new enricher that come with the kit

 

[kmalysa]

Put heat shrink tubing on the clamps to hide them in plain sight.

Great Tip

 

[Bubba_BigDog]

Will have to remember that tip when I get mine in. :up:

 

[RCAdd1ct]

On the tip....funny thing is that I tried it when I helped a friend install an air cleaner.

I am to lazy to do it to my own bike.